- Description
Details
Dante™ Networked Audio Interface - 2x2 Mic/Line I/O
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring. The unDIO2x2+ is an upgrade of the earlier unDIO2x2, and adds several features including true +48V phantom power, maximum input and output levels of +20dBu, added input gain settings, and full output level control.
- Features
Features
- Fully DDM ready
- Small form factor, can be unobtrusively located near analog sources or sink
- Dual power (DC or PoE) means the unDIO2x2+ will work in systems with either standard or PoE ethernet switches
- Five input gains to accommodate common line levels, phantom power, and dynamic mics
- +48V phantom power per channel - powers virtually all types of phantom-powered microphones typically used in installed AV systems
- Analog output gains software adjustable between 0dB and -60dB plus mute to accommodate all types of line input audio equipment - both consumer and pro levels
- Full Dante system status LEDs on the front panel
- Specification
Audio Inputs Input Type Balanced and RF filtered 3- pin depluggable Gain -12 dB Input Pad 0dB, +15dB, +30dB, +45 dB software selectable Input Impedance >1.8K ohms at any gain setting Maximum Input Levels +20dBu @ 0dB gain (with pad active)+8dBu @ 0dB-7dBu @ +15dB gain-22dBu @ +30dB gain-37dBu @ +45dB gain Phantom Power +48V, software selectable Audio Outputs Output Type Balanced line level with automatic muting on loss of Dante signal Output Volume -60 dB to 0dB in 1 dB steps Maximum Output Level +20dBu Audio Performance EIN -EIN -119bBu (+45dB gain) Output Noise < -85dBu @ 0dB gain System THD < 0.05% at any gain, input signal 3dB below maximum Dante Network Physical Level Standard Ethernet Connector Single RJ-45 Cable Quality CAT-5e or better Transmission Speed 100 Mbps Support Sample Rates 44.1kHz48kHz Minimum Dante Network Latency 1ms Power Requirements PoE 802.3af PoE PD compliant Power Consumption < 5W Max Cable Quality CAT-5e or better Product Compliance FCC CFR 47 Parts 15B Class A, EN55011 ICES-003 CE (EN55022 / EN55024) RoHS REACH Dimensions (H x W x D) 1.06" (26.92 mm) x 6.45" (163.83 mm) x 3.45" (87.63 mm) Weight 0.8 lbs (0.36 kg) - Documents
Documents
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $49.99 and Up - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
