Lowell MA60 5 Channel Mixer Amplifier

Home /
Commercial Sound Equipment /
Commercial Mixer Amplifiers /
Lowell MA60 5 Channel Mixer Amplifier

More Views

Lowell MA60 5 Channel Mixer Amplifier

Part # MA60

Model # MA60

The Lowell MA60 5 Channel Mixer Amplifier includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level.

Availability:

List Price $806.30

Pro Acoustics Price Price $709.54

Your Savings $96.76 (12%)

Qty:

Share with
Add to Wishlist

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The mixer and 60 W power amplifier is powered via switchable 115VAC or 230VAC @ 50/60Hz or 24VDC. Includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level. Includes rackmount kit for 19" rack.

Features

Features

Maximum power output of 60 W
Five input channels, switchable from XLR mic connector to AUX input dual combining RCA-phono connectors
Includes 4 ohms, 8 ohms, 25 V, and 70 V speaker outputs at a screw terminal strip
AUX-6 input channel with dual combining RCA-phono connectors and rear level control
Main AC input protected by circuit breaker on rear panel
Unswitched (always on) AC outlet in rear is protected by separate circuit breaker
Mic-1 mutes channels 3–6
Separate telephone input with level control in rear mutes all other inputs
Dual RCA/phono parallel tape-out connectors and dual RCA-phono parallel PRE-OUT (preamp out) connectors in rear
Jumper couples one PRE-OUT jack to POWER-AMP-IN jack
Chassis-ground termination screw in rear
Rack mounting brackets included

Specification

AC Supply Voltage	115 or 230 VAC (rear panel switchable); ±10%, 60Hz
DC Supply Voltage	24 VDC (Max. 10% deviation)
Power Consumption	150 W (AC); 5A (DC)
Speaker Level Outputs	Screw terminal strip, 4 ohms, 8 ohms, 25 V, 70 V; 60 W RMS
Tape Outputs	Dual parallel RCA-phono jacks, 1V @ 4.7 k ohms
Preamp (“Pre”) Outputs	Dual parallel RCA-phono jacks, 1V @ 600 ohms
Unswitched AC Outlet	500 W maximum
MIC Inputs 1–5	XLR receptacle or screw terminals, 1m V @ 600 ohms balanced
AUX Inputs 1-6	Dual parallel RCA-phono jacks, stereo converted to mono, 150 mV @22 k ohms
Telephone Input 7	Screw terminal strip, 150 mV @ 600 ohms balanced
Power Amp In	RCA-phone jack, 1V @ 8k ohms
Frequency Response	50 Hz – 20 kHz ±3 dB (Test signal inserted at AUX input)
Total Harmonic Distortion	Less than 1% at 1 kHz at rated power
Signal to Noise Ratio	80 dB (Test signal inserted at AUX 6 input); 60 dB (Test signal inserted at MIC 1 input)
Tone Controls	Bass ±10 dB @ 100 Hz, Treble ±10 dB @ 10 kHz
Phantom Power	16 VDC, shipped from factory with internal phantom power jumpers set “ON” for channels 1-5
Priority Muting	Three levels of priority. See “Amplifier Muting–Priority Scheme” in Installation Instructions
Dimensions (H x W x D)	3.5" (88.9 mm) x 17" (431.8 mm) x 13.5" (342.9 mm)
Weight	17.0 lbs (7.7 kg)

Reviews