Commercial Power Amplifiers

The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

Both a 70V and 100V amplified output are provided on the RDL FP-PA20A to drive corresponding speakers in a distributed sound system.

The RDL FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.

The Bogen Communications C35 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

The SoundTube MA501t is a versatile little mono amplifier for localized amplification in constant-voltage sound systems.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The Atlas Sound PA601 Single Channel Power Amplifier features 60 Watts of pure power in a compact package with simple, rear mounted RCA I/O. A unique loudness contour control provides just the right amount of low frequency enhancement for low level listening environments.

The Crest Audio® IPA™-2300 utility amplifier provides installers and contractors the simplest and most efficient solution for background music and paging applications. The IPA-2300 is perfect for grocery stores, restaurants, waiting rooms or any retail space where background music with paging is required.

The Bogen Communications C100 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

The Lab Gruppen LUCIA 120/2 incorporates a digital front end with a 2 x 2 Mix Matrix and comprehensive DSP features.

The Ashly FA-125.2 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The Lab.gruppen LUCIA 240/2 has been designed and engineered for quick installation and easy setup.

The JBL CSA 1300Z is simple to configure and provides a DriveCore-based sound solution with superb performance.

The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.

For higher power the QSC SPA2-200 two channel amplifier delivers up to 200W rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 400W rms into 4 or 8 ohms.

The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.