Commercial Power Amplifiers
Talk To An Audio Engineer
Commercial Audio Power Amplifiers for paging, 70 volt audio systems and public address sound systems. We carry all commercial audio brands such as, TOA, Atlas Sound, JBL Commercial, QSC Audio, Bose, Denon, Yamaha Commercial Audio, Crown Audio, Bogen, Rolls Audio, Ashly Audio, Peavey, Crest Audio and many more. Made to run 24/7 and last in any challenging environment. Many of our brands offer UL and cUL Listed models and carry up to five-year warranty.
Featuring the latest commercial amp technology from Crown Audio, QSC Audio and Yamaha Commercial Audio offering cutting-edge amplifiers with energy-efficient green power handling. Feature and option rich capabilities for commercial integrators and technicians such as configurable inputs/outputs, multi-channel amplifiers. DSP signal processing, Networkable, Ethernet IP Addressable, CobraNet, Digital Interfaces with recall created settings from built-in front control panels with fast, simple, configuration without a PC. Low impedance (4/8 Ohms) amplification as well as constant voltage amplification with no transformers required, with 25V, 70V and 100V options. The universal switch-mode power supply's with (70 VAC to 240 VAC 50-60 Hz) for installations worldwide. Technology breakthroughs with a balance of robust functionality, Safety Compliance: cTUVus, CE, FCC, RoHS and awesome reliability at a reasonable cost.
When reliability, price and performance are critical - such as in paging and music distribution for retails stores, churches, offices, stadiums, airports, hospital, schools, emergency-evac and industrial public address sound systems, shop Pro Acoustics for your commercial audio needs.
-
The JBL CSA140Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.
Learn More - List $349.00Price $279.00Savings $70.00 (20%)The Rolls RA170 power amplifier was designed especially for the installation contractor. The RA170 is a single rack-space, mono unit with a choice of an RCA or 1/4" unbalanced input. Learn More
-
The PA2030a Power Amplifier features an interface that has been specifically designed for effortless operation.
Learn More -
The JBL CSA180Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.
Learn More -
The JBL CSA240Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.
Learn More -
The JBL CSA280Z Amplifier goes well beyond what's expected and provides a compact and powerful amplification solution for installed applications.
Learn More -
The TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging, music distribution for airport, hospital and industrial sound system.
Learn More - The 40881 accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs. Learn More
-
The Yamaha PA2120 is easy to setup and features a user-friendly interface for effortless operation. Remote volume control and microphone on/off switching via optional DCP control panels (DCP4V4S, DCP1V4S, DCP4S, max 2 units).
Learn More - List $413.06Price $309.79Savings $103.27 (25%)
The RDL FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.
Learn More -
The SoundTube MA501t is a versatile little mono amplifier for localized amplification in constant-voltage sound systems.
Learn More - List $708.05Price $354.99Savings $353.06 (50%)
The Bogen Communications C35 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.
Learn More -
The Atlas Sound PA601 Single Channel Power Amplifier features 60 Watts of pure power in a compact package with simple, rear mounted RCA I/O. A unique loudness contour control provides just the right amount of low frequency enhancement for low level listening environments.
Learn More - List $1,024.67Price $513.99Savings $510.68 (50%)
The Bogen Communications C100 is a public address mixer amplifier that provides mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm, 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.
Learn More -
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
Learn More -
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
Learn More - List $886.26Price $664.70Savings $221.56 (25%)
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
Learn More -
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
Learn More -
The TRA-2075 power amplifier is an advanced, efficient 2-channel amplifier featuring 75W at 4 ohm. Perfect for Low Impedance, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
Learn More -
The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.
Learn More -
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
Learn More -
With the TOA MA-725F Matrix Amplifier you spend less time and stress for sound operation and more time for your customers. The MA-725F is a 6-input matrix mixer: 4 of its inputs are configured for BGM or other line-level sources, while two balanced inputs are designated for priority sources, such as paging mics or message players.
Learn More -
The Atlas Sound TSD-PA10VG Mono Power Amplifier is a cost effective 10W mono amplifier for 4Ω and distributed constant voltage speaker systems. It is also a good alternative for small projector systems as it can be used with as many as (8) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting. Learn More
-
The Atlas Sound TSD-PA20VG Mono Power Amplifier is a cost effective alternative for small projector systems as it can be used with as many as (16) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting.
Learn More