Commercial Power Amplifiers

The Ashly’s nX3.04 Network Power Amplifier feature lightweight, energy efficient Class D switching amplifier technology combined with multiple independent power supplies that provide increased performance and reliability.

The Dynacord IPX5:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The Ashly nXe3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.

The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

The Crown DCi 8|600 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.

The Dynacord IPX10:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The Dynacord IPX10:8 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The Crest CKd 1204 provides 1,250 watts per channel in four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.

The Crest CKd 604 provides 625 watts per channel in four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.

The Electro-Voice PA2250T 120V Dual Channel Power Amplifier provides excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping will not generate excessive distortion.

The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The audio performance of the Electro-Voice PA2400T Power Amplifier is superior and fulfills the requirements in many demanding long term applications from sound reinforcement, paging or life safety installations. It's high performance torroidal power and output transformers combine clean saturation free audio performance.

The Ashly TRA-4150 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The Yorkville AP4K AP Series power amplifier is capable of delivering 1800 watts per channel into either a 2 or 4 ohm load, Yorkville Sound's new AudioPro AP4K uses proven Class-H technology and advanced protection circuitry to provide unmatched long term reliability in the field.