The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more. With a rated output power of 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode, you're sure to have ample power to meet the most demanding needs. The nXp3.04 is ethernet controllable using the Protea™ NE software and has a real-time clock with event scheduler. It also features Class-D switching amplifier technology, multiple internal power supplies, and a continuously variable cooling fan.

• Four channel high power, lightweight amplifier design
• Individually configurable speaker outputs for Low-Z (to 2 Ohm), or High-Z (70V or 100V) via rear panel dip switches
• Front panel power switch and level controls, defeatable
• Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable
• Combo XLR - 1/4" jack and Euroblock connectors on all inputs
• SpeakON® twist locking loudspeaker connectors for security, safety, and reliability
• Back panel DIP switches per-channel for selection of hipass filter, limiter, input gain, and speaker output configuration
• Remote DC level control per channel
• Automatic selection of 110-120VAC or 220-240VAC operation, 50-60Hz, with detachable PowerCON® AC connector
• Power-saving automatic sleep mode, less than 1W, defeatable
• Continuously variable cooling fan
• Extensive protection circuitry
• Independent amplifier and power supply circuitry
• Ethernet control and monitoring of amplifier functions, with front panel COM activity LED
• iPad "Ashly Remote" application available for custom design of end-user wireless control interface
• Serial data port for Ashly serial remote control devices such as the WR-5 or RD-8C
• Optional RS-232 data converter for third-party controllers such as Crestron
• Software defeatable power switch and level controls
• Standby mode, 30% reduction from idle, triggered on or off by contact closure, software control, or event scheduler
• Programmable power-on delay for Off-to-On or Sleep-to-On transitions
• Preset recall via contact closure, software control, remote control, or event scheduler
• Aux preamp outputs
• Fault condition logic outputs
• Optional Cobranet or Dante network audio and AES3 digital audio input with zero-latency pass-through
• Protea DSP including dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more
• Impedance monitoring of individual amplifier outputs for quick and easy diagnosis of potential speaker problems
• iPad control of select DSP functions including gain, mute, matrix, A/B source select, PEQ filter level, and meters
• Networkable remote gain and zone control using Ashly neWR-5 and FR-8/16
• Five-year warranty

Manual

Spec Sheet