- Description
Details
This Ashly Audio ne8250 eight-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating. When switched into bridged-mono mode, channels 1+2 or 3+4 of the amplifier delivers at least 500 watts RMS into an 8 Ohm load. The power amplifier includes Euroblock input connectors and Euroblock output connectors.
Connecting and controlling an amplifier for networked systems has now been simplified with ne amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
- Features
Features
- 10/100 Ethernet comes standard for remote control and monitoring
- FIR Filter capable (with DSP)
- Low-Z, 25V, 70V, 100V models
- Protea DSP, AES3, CobraNet® and Dante® input options
- DC voltage remote gain control
- Switched-mode power supply, Class-D output
- Stepped, calibrated input attenuators
- Remote power standby
- Disable all front panel controls via software
- Temperature sensitive variable speed fan with side-to-front airflow
- Selectable HPF frequencies (80Hz, 400Hz, off) on 25V, 70V, and 100V models
- 4-stage level meters
- Output current and temp indicators
- Safety/Compliance: cTUVus, CE, FCC, RoHS
- Specification
Rated Power 8 ohms (per channel) 150W Rated Power 4 ohms (per channel) 250W Rated Power 8 ohms (Bridged) 500W S/N (20 Hz-20 kHz, unweighted) >107dB Frequency Response (8 ohms) 20 Hz - 20k Hz, (unweighted) ±1dB Input Impedance 20k ohms, balanced Input Sensitivity 6.2dBu Maximum Input Level +21dBu Damping Factor (8 ohms) > 250 Cooling Temperature dependent speed-controlled fan (Front in, Side out) Output Circuitry Class D Connectors (each channel) Input - Euroblock
Output - EuroblockFront Indicators (LED color) Power (Blue), Standby (Yellow), Protect (Red), Disable (Yellow), Com (Green), Bridge (Green) Rear Controls Ethernet 10/100, Channel bridge switch (Low-Z only), Remote standby, Preset recall (4) Amplifier and Load Protection Output Over curent, DC Output, Main Supply Rail Over voltage, Chassis Temperature, Inrush Limiting Cordset 15A Edison 3-Prong IEC Environmental 40-120deg. F, (4-49deg. C) non-condensing Dimensions (H x W x D) 3.50" (89 mm) x 19" (483 mm) x 16.84" (428 mm) Net Weight 24.7 lbs (11.2 kg) Shipping Weight 30.8 lbs (13.9 kg) - Documents
Documents
- Reviews
Write Your Own Review