Ashly Audio nX8002 2-Channel Multi-Mode Power Amplifier

Home /
Commercial Sound Equipment /
Commercial Power Amplifiers /
Ashly Audio nX8002 2-Channel Multi-Mode Power Amplifier

More Views

Ashly Audio nX8002 2-Channel Multi-Mode Power Amplifier

Part # nX8002

Model # nX8002

The Ashly nX8002 2-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

Availability:

Qty:

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Ashly nX8002 is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W. A switch mode power supply shall auto-detect 110 – 120VAC or 220 – 240VAC mains, and a Neutrik® powerCON shall be used for the AC cord. Each channel has selectable output modes of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V.

Each channel has a remote DC level control. Input connectors are Neutrik® XLR/TRS combo jacks and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The amplifier has temperature dependent variable speed forced-air cooling. The unit weighs <21.5 lbs (9.75 kg), measures 19"W x 3.5"H x 16.8"D (483 mm x 89 mm x 428 mm), and mounts in a standard 19" rack.

Features

Features

Class-D Switching Amplifier Technology
Multi-Mode Operation
Energy Efficiency
Multiple Internal Power Supplies
Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
Remote DC level control per channel
Extensive protection circuitry, continuously variable cooling fans
Neutrik® Combo XLR – 1/4" TRS jack plus Euroblock input connectors
Neutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliability
Neutrik® powerCON® detachable AC mains connector
Safety/Compliance: cTUVus, CE, FCC, RoHS

Specification

Channels	2
Max Output Power	Measured in Watts, Per Channel, Low-Z Output, All Channels Driven
2/4/8 Ohms	800
Low Z Output	Measured in Watts, Bridge Mode, All Channels Driven
4/8 Ohms	1600
70V, 100V Output	Measured in Watts, All Channels Driven
70V (per channel); 100V (per channel)	800
Total Power Draw	Measured in Watts, Total for all Channels
Sleep Mode	< 1
Standby Mode	25
Idle (no signal)	40
Current Draw	Measured in Amps, Total for all Channels, 120VAC, Divide by 2 for 240V
Sleep Mode	0.1
Standby Mode	0.38
Idle (no signal)	0.70
Max Current Draw	Measured in Amps, Typical Input, All Channels Driven, Divide by 2 for 240V
1/8 Max Power @ 2 Ohms	4.6
Thermal Dissipation	BTU/hr, Typical Input, Total for all Channels
Sleep mode	< 3.4
Standby mode	85
Idle (no signal)	136
1/8 Max Power @ 2 Ohms	495
Voltage Gain	Selectable at 26dB, 32dB, 38dB, or 1.4V
Damping Factor	>250 (8 Ohms load <1kHz)
Input High Pass Filter	80Hz 2nd order
Distortion (SMPTE, typical)	<0.5%
Distortion (THD-N, typical)	<0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
Channel Separation	-75dB (dB from full output, 1kHz)
Signal to Noise (20Hz–20kHz, unweighted)	>108dB
Frequency Response	20Hz–20kHz, +/-0.05dB
Balanced Input Connector	Euroblock 3.5 mm, 1/4" TRS and XLR Combo jack
Input Impedance	10k Ohms
Maximum Input Level	+21dBu
Speaker Output Connector	Neutrik® speakON®
Remote DC Level Control	Euroblock 3.5mm - Gnd, CV, V+ per input
Attenuators (per channel)	Front panel and remote. Fully off = Mute
Amplifier Protection	Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling	Continuously variable temperature controlled axial fan(s)
Environmental	32–113 deg F, (0–45 deg, C) (non-condensing)
Sleep	On, amplifier is asleep from audio inactivity
Disable	On, power switch & front panel attenuators are disabled
	Power Requirements (@ 50/60Hz)
Nominal (Automatic Sensing SMPS)	120VAC; 240VAC
Operating Range	70–135VAC; 140–270VAC
Minimum Power-Up	85VAC; 170VAC
Dimensions (H x W x D)	3.5" (89 mm) x 19" (483 mm) x 16.84" (428 mm)
Shipping Dimensions (H x W x D)	22" (559 mm) x 24.5" (622 mm) x 5.25" (133 mm)
Net Weight	21.5 lbs (9.75 kg)
Shipping Weight	27.6 lbs (12.5 kg)

Documents