- Description
Details
The QSC SPA2-60 SPA Series 2 Channel Audio Amplifier delivers 60 watts rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 200 watts rms into 4 or 8 ohms. When the channels are bridged they can be switched into 70V or 100V direct drive mode providing up to 250 watts rms into a mono 70V or 100V output. There is also an 80Hz highpass filter for bridged operation ensuring that 70V or 100V loudspeakers transformers are not overdriven and saturated by too much low frequency content. The SPA2-60 is ideal for stereo or mono applications of voice or music audio content.
The SPA Series amplifiers from QSC are two 1 RU, 1/2 rack space, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled. Both amplifiers in the series are ENERGY STAR qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black chassis with unique mounting hardware enabling rack, table and wall mounting.- Features
Features
- Up to 60 Watts per channel into 4 and 8 Ohms
- ENERGY STAR® certified amplifier
- Bridgeable outputs for higher power
- Auto-Ramp provides quiet startup and power-down
- Rack-mountable 1U, half rack width enclosure
- Specification
Frequency Response (20 Hz - 20 kHz) +0.1 dB, -0.1 dB Input Impedance >10k Ω (balanced), >10k Ω (unbalanced) Maximum Input Level +12.3V (+24 dBu) Highpass Filter Switchable 80 Hz when Bridged in 70V & 100V Front Panel Indicators Power, per channel Signal, per channel Protect/Limit Controls 4Ω / 8Ω / 70V Bridge Highpass On/100V Bridged Highpass On per channel pair Agency Approvals UL, CE, ENERGY STAR, RoHS/WEEE compliant, FCC Class B (Conducted and Radiated emissions), UL 2043 with PL-Kit Stereo Mode, Watts per Channel 8Ω Dynamic, Both Channels Driven 60W 4Ω Dynamic, Both Channels Driven 60W Bridged Mode, Watts per Channel 8Ω & 4Ω Dynamic 200W 70V & 100V 250W Signal to Noise >100 dB (A weighted, 20 Hz–20 kHz) Input Sensitivity 1.23V rms (+4 dBu) Maximum Voltage Gain 25.0 dB (8Ω setting) Output Circuitry Class D Dimensions (H x W x D) 1.7" (43 mm) x 8.7" (220 mm) x 9.5" (241 mm) Weight 3.5 lbs (1.6 kg) Shipping Weight 6 lbs (2.7 kg) - Documents
Documents
- Reviews
Write Your Own Review