Community IP8-1151WR High Power 15-inch LF Point Source Outdoor Installation Loudspeaker
I SERIES Point Source 800 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of rotatable coverage patterns and an easily installed U-Bracket that accelerates system design and system commissioning.
An FEA-optimized linear suspension, high-flux neodymium motor, and integral demodulation ring ensures precise control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications.
The 15-inch (381mm) LF driver is housed in a trapezoidal enclosure with the same vertical dimensions as the IP8-0002 MF/HF loudspeaker as well as the IS8-115 and IS8-118 Subwoofers. The system has been engineered to allow designers to develop very low profile three-way and four-way systems. Additionally, the IP8-1151 can be used with full size I SERIES arrays to enhance LF pattern control and steering capabilities when flown above, below, beside or behind an existing I SERIES array.
| Operating Mode | Single Amp |
|---|---|
| Operating Environment | Indoor or Weather-Resistant Outdoor |
| Operating Range | 30 Hz to 3.8 kHz |
| Transducers | LF – 1 x 15" (381 mm) neodymium motor woofer, 3" (76 mm) voice coil, demodulation ring |
| Continuous Power Handling @ Nominal Impedance | Single Amp: 69V 600W @ 8 ohms (2400W peak) |
| Nominal Sensitivity | LF: 96dB @ 1W, 96dB @ 2.83V |
| Nominal Maximum SPL | LF: 130dB peak, 124dB continuous |
| Input Connection | (2) Screw terminal blocks (4-position) |
| Mounting Points | (14) M10 threaded rigging points |
| Environmental | Outdoor: IP55W per IEC 60529, MIL-STD-810G |
| Accessories | Rigging kits include: BFR22: BalancePoint™ Fly Rails; IVY0002: Vertical Yoke; IAF55: Isometric Array Frame; HAB3-BFR38: Sub/Dual 3-Way Horiz Array; HSB3/VSB3: Multiple Splay Brackets for Horiz/Vert Arrays with/without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit; IUB0002WRG: Reinforced 304SS U-Bracket (Grey) |
| Dimensions (H x W x D) | 19.8" (503 mm) x 22.1" (561 mm) x 26.3" (668 mm) |
| Weight | 54 lbs (24.5 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
