Community IP8-1152WR66 High Power 15-inch Two-Way Outdoor Installation Loudspeaker
I SERIES Point Source 800 weather-resistant loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of rotatable coverage patterns and an easily installed U-Bracket that accelerate system design and system commissioning.
FEA-optimized linear suspensions, high-flux neodymium motors, and integral demodulation rings ensure precise control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications. The HF compression driver's non-metallic diaphragm provides natural, transparent sound quality that accurately reproduces and complements any source.
The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Factory-standard passive or optional biamp operating modes further expand performance capabilities.
| Operating Mode | Passive or Biamp with DSP |
|---|---|
| Operating Environment | Indoor or Weather-Resistant Outdoor |
| Operating Range | 31 Hz to 19 kHz |
| Nominal Beamwidth (H x V) | 60°x 60°, rotatable waveguide |
| Transducers | LF 1 x 15" (381 mm) neodymium driver, 3" (76 mm) voice coil, demodulation ring HF 1 x 1.4" (36 mm) exit compression, 2.6" (66 mm) voice coil, demodulation ring, ketone polymer diaphragm, neodymium compression driver |
| Continuous Power Handling @ Nominal Impedance | Passive: 80V 800W @ 8 ohms (3200W peak) LF: 69V 600W @ 8 ohms (2400W peak) HF: 25V 80W @ 8 ohms (320W peak) |
| Nominal Sensitivity | Passive: 94dB @ 1W, 94dB @ 2.93V LF: 95dB @ 1W, 95dB @ 2.93V HF: 108dB @ 1W, 108dB @ 2.93V |
| Nominal Maximum SPL | Passive: 129dB peak, 123dB continuous LF: 129dB peak, 123dB continuous HF: 133dB peak, 127dB continuous |
| Input Connection | (2) Screw terminal blocks (6-position) |
| Mounting Points | (15) M10 threaded rigging points |
| Environmental | Outdoor: IP55W per IEC 60529, MIL-STD-810G |
| Accessories | Rigging kits include: BFR22: BalancePoint™ Fly Rails; IUB1152: U-Bracket; IVY1152: Vertical Yoke; IAF40/IAF55: Isometric Array Frames; HAB-BFR38: Sub/ Dual 2-Way Horiz Array; HSB/VSB: Multiple Splay Brackets for Horiz/Vert Arrays with/without Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit; IUB1152WRG: Reinforced 304SS U-Bracket (Grey) |
| Dimensions (H x W x D) | 30.8" (782 mm) x 16.5" (419 mm) x 20.07" (510 mm) |
| Weight | 68 lbs (30.8 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
