The V2-212S is a low-profile, dual-driver subwoofer system designed to augment and extend the low frequency output of any VERIS 2 full-range loudspeaker system. Powerful and low in distortion, the V2-212S produces authoritative low frequency output. The result is a deep, but punchy sonic signature that can handle most any musical style with ease. Solidly constructed of cross-laminated birch plywood, this subwoofer provides an accurate acoustic response uncolored by enclosure resonance. Its small size makes it a perfect fit for jazz clubs, bars, restaurants, worship centers, AV presentations, and other applications that require extended bass, but do not have the space available to install larger, bulkier systems.
The enclosure may be suspended from its M10 threaded rigging points, or simply located on the floor. As with all subwoofers, a corner placement is recommended when possible, in order to take advantage of the acoustical boundary effect for the highest possible efficiency. The V2-212S includes Community’s exclusive DYNA-TECH™ driver protection circuitry to protect against abusive operating conditions, and also features Community’s patented Cool-Coil™ heat evacuation technology to minimize cone driver power compression and ensure longterm reliability.
The V2-212S is a versatile performer for applications requiring high quality, high power, and extended low frequency response at a reasonable cost.
| Operating Range | 37 Hz to 500 Hz (-10 dB) |
|---|---|
| Frequency Response | 50 Hz to 125 Hz (-3 dB) |
| Max Input Ratings | 300W continuous, 750W program 34.6 volts RMS, 69.3 volts momentary peak |
| Sensitivity (1W/1m) | 98 dB (50 Hz to 200 Hz) half space |
| Maximum Output | 123 dB SPL / 129 dB SPL (peak) |
| Nominal Impedance | 4 ohms |
| Minimum Impedance | 4.2 ohms @ 110 Hz |
| Nominal –6dB Beamwidth | 360° H x 180° V |
| Recommended Signal Processing | 40 Hz, 24 dB/octave high pass filter |
| Drivers | LF 2 x 12-inch |
| Driver Protection | DYNA-TECH protection circuitry |
| Input Connection | NL4-compatible locking connector with terminal strip in parallel |
| Controls | None |
| Enclosure | 18 mm, 11-ply cross-laminated birch |
| Mounting/Rigging Provisions | 8 x M10 threaded rigging fittings |
| Finish | Catalyzed polyester two-part paint, black or white |
| Grille | Powder coated steel, black or white finish |
| Dimensions (H x W x D) | 13.9" (354 mm) x 35.9" (912 mm) x 17.9" (455 mm) |
| Weight | 70 lbs (31.8 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
