The V2-26B in black is a versatile dual 6.5" two-way full-range loudspeaker designed for distributed and delay sound reinforcement systems. Compact yet powerful, it delivers extended low-frequency and midrange performance compared to the smaller V2-6, making it ideal for cafes, restaurants, shopping centers, airports, and other commercial environments. When paired with a subwoofer such as the V2-212S, the V2-26B achieves broad-spectrum, high-fidelity sound that far exceeds its modest size.
In larger venues like auditoria, theaters, and houses of worship, the V2-26B excels as a delay or fill speaker, ensuring consistent sound levels and tonal balance throughout the space. With a 90° H x 70° V dispersion pattern, frequency-shaded woofers, and a constant-directivity rotatable horn, it provides smooth, controlled coverage. The rotatable horn allows for either vertical or horizontal mounting, while the included yoke bracket with 10° and 20° vertical standoffs enables flexible wall or ceiling installation.
Built for durability and reliability, the V2-26B features Dyna-Tech driver protection circuitry, a ferrofluid-treated HF driver for heat dissipation, and Carbon Ring Cone Technology for increased piston area and excursion capability. Equipped with a terminal strip and NL4-compatible connectors, and finished in a discreet black enclosure, it is a dependable solution for distributed audio, supplemental PA, and fixed installations. Fully compatible with Community ALC404D controllers, with higher-power ALC models also supported.
| Operating Range | 70 Hz to 18 kHz (-10 dB) |
|---|---|
| Frequency Response | 90 Hz to 16 kHz (±3 dB) |
| Max Input Ratings | 200W continuous, 500W program 28.3 volts RMS, 56.7 volts momentary peak |
| Sensitivity (1W/1m) | 92 dB (100 Hz to 12.5 kHz) free space |
| Maximum Output | 115 dB SPL / 121 dB SPL (peak) |
| Nominal Impedance | 4 ohms |
| Minimum Impedance | 3.5 ohms @ 220 Hz |
| Nominal –6 dB Beamwidth | 90° H x 70° V (in vertical position) |
| Crossover Frequency | 1.3 kHz |
| Recommended Signal Processing | 80 Hz, 24 dB/octave Butterworth high pass filter |
| Drivers | LF 2 x 6.5" cone HF 1 x 1" |
| Driver Protection | DYNA-TECH protection circuitry |
| Input Connection | NL4-compatible locking connector with terminal strip in parallel |
| Enclosure | Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch |
| Mounting/Rigging Provisions | 9 x M6 threaded rigging fittings 4 x M6 threaded fittings for third-party suspension products |
| Finish | Catalyzed polyester two-part paint, black |
| Grille | Powder coated steel, black finish |
| Dimensions (H x W x D) | 22.5" (573 mm) x 9.8" (249 mm) x 10.1" (258 mm) |
| Weight (incl. Bracket) | 28.1 lbs (12.7 kg) |
| Shipping Weight | 38.1 lbs (17.28 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
