EAW MW12 MicroWedge Series 12" 2-Way Full-Range Stage Monitor
Usually arrives in 5-9 business days.
The EAW MicroWedge MW15 stage monitor enclosure monitors are processor enhanced (rather than processor dependent) for true "plug and play" operation. User selectable single-amp and bi-amp modes are provided.
The MicroWedge MW15 is a collaboration between original MicroWedge Series inventor Dave "Rat" Levine (owner of Rat Sound Systems, Inc.) and the EAW Engineering Department, resulting in dramatically upgraded performance and ergonomics. A 15 inch woofer is paired with a 3 inch voice coil HF compression driver on a horn that provides full yet controlled 90 degree horizontal dispersion. All frequencies emanate from the exact same point, eliminating crossover region problems and time/phase irregularities, as well as optimizing coherency. The coaxial approach also contributes to a very compact, low-profile footprint.
MicroWedge MW15 monitors are processor enhanced (rather than processor dependant) for true "plug and play" operation. User selectable single-amp and bi-amp modes are provided. The large port on the front of the cabinet enhances LF response in coupling with the floor, and this port houses both the carrying handle and the passive/ active mode switch. The port also contains dual input connectors, keeping them concealed and protected, and allowing wedges to be placed as close together as desired. Additional cable can be stored in the port without impacting LF performance.
Rubber feet on the bottom of the enclosure reduce abrasion, and new integral rigging hardware – also mounted on the enclosure bottom – facilitates easy flying. The Baltic birch cabinets are protected with EAW’s RoadCoat™ finish that’s extremely durable, and the rugged steel grille keeps its distinctive shape even when stood upon. All components are highly liquid tolerant – virtually impervious to spilled drinks as well as natural elements like rain.
| Transducer | Loading |
|---|---|
| LF 1 x 15 | Vented |
| HF 1 x 1.4 | Horn-loaded |
| Amplifier Channels | External Signal Processing |
| Single-Amp LF/HF | High Pass Filter |
| Bi-Amp LF, HF | DSP w/2-way filters |
| Operating Range | 62 Hz to 20 kHz |
| Nominal Beamwidth (Conical) | Horz/Vert: 90° |
| LF/HF 96 dB | 62 Hz to 20 kHz |
| LF 97 dB | 60 Hz to 904 Hz |
| HF 106 dB | 710 Hz to 20 kHz |
| Nominal | Minimum |
| LF/HF 8 | 6.3 @ 806 Hz |
| LF 8 | 7.4 @ 61 Hz |
| HF 8 | 7.0 @ 4597 Hz |
| High Pass Filter | High Pass => 50 Hz, 12 dB/octave Butterworth |
| LF/HF 89 dB | 1000W @ 8 ohm |
| LF 89 dB | 1000W @ 8 ohm |
| HF 35 dB | 150W @ 8 ohm |
| Nominal | Minimum |
| LF/HF 126 dB | 132 dB |
| LF 127 dB | 133 dB |
| HF 128 dB | 134 dB |
| Material | Baltic birch plywood |
| Finish | RoadCoat™ wear resistant textured black paint |
| Grille | Powder-coated perforated steel |
| Width (Rear) | 19.05" (483.9 mm) |
| Trap. Angle (Degrees per Side) | 6.5° |
| Floor (Degrees Up) | 27° |
| Dimensions (H x W x D) | 14.10" (357 mm) x 14.75" (374.6 mm) x 24.17" (614 mm) |
| Net Weight | 65 lbs (29.5 kg) |
| Shipping Weight | 74 lbs (33.6 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.