More Views

Electro-Voice PC Boundary Satellite Boundary Microphone (Discontinued)

Part # F.01U.120.570
Model # PC Boundary Satellite

The Electro-Voice PC Boundary Satellite Boundary Microphone features an EV PolarChoice multi-pattern microphone. It is designed to take acoustic advantage of placing a microphone close to a "boundary" such as a conference table.

Description

Details

The PC Boundary Satellite is a low profile multi-pattern microphone. This low-profile foundation hides PC Boundary Satellite’s most powerful feature space for a wireless transmitter. Turn the microphone over to reveal the specially designed compartment for housing an Electro-Voice or Telex bodypack transmitter. Connect the microphone to the bodypack, set-up the wireless channel, and place the PC Boundary Satellite anywhere an easy-to-use microphone is required. No longer do you have to cut holes in tables, run long cables, or compromise the architectural integrity of an installation. With the PC Boundary Satellite, anything is possible.

The PC Boundary Satellite features an EV PolarChoice multi-pattern microphone. The multi-pattern versatility of the PolarChoice microphone makes it a true "problem solver". With one non-directional and three directional polar patterns available, the PolarChoice microphone is ideal for virtually any installation. Of particular interest is the figure 8 pattern that allows miking people on opposite sides of a table with only one microphone, while providing a dramatic reduction of ambient room noise.

The PC Boundary Satellite is designed to take acoustic advantage of placing a microphone close to a "boundary" such as a conference table. Advantages include reduced phase cancellation and up to 3dB reduction in ambient noise. It also includes a switchable high pass filter and high-performance vibration damping pads on the bottom to greatly reduce any vibration-induced noise pick-up.

Features

Features

  • Selectable polar patterns: omni, cardioid, supercardioid or figure 8
  • RF shield provides superior RFI/GSM shielding
  • Versatility for different acoustic environments
  • Consistent microphone voicing across all four patterns
  • Easy to use mute switch
  • Can be programmed to operate as either latching on/off or momentary push-to-mute/push-to-talk
  • High visibility blue LED clearly displays mic status to the user
  • Accepts Electro-Voice and Telex bodypack transmitters
Specification
Generation ElementDual condenser, back electret
Frequency Response50 Hz to 20,000 Hz
Polar PatternsOmnidirectional, Cardioid, Supercardioid, Figure 8
Switches and ControlsTop mounted momentary membrane switch Push on/off, or push-to-mute selector
Sensitivity, Open Circuit Voltage, 1 kHz17.8mV/Pascal
Clipping Level (1% THD)>130 dB SPL
Equivalent Noise<26 dB SPL “A” weighted (0 dB=20 micropascals) Dynamic Range: >98 dB
Output Impedance, 1 kHz1000 ohms
Power Requirements5 VDC, supplied by optional bodypack
Current Consumption<1.5 mA
PolarityPin 2 positive, referenced to pin 1, with positive pressure on the diaphragm
Dimensions without Bodypack
(H x W x D)
2" (50.3 mm) x 5.5" (140.8 mm) x 3.2" (81.2 mm)
Net Weight without Bodypack0.28 lbs (128 g)
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Electro-Voice PC Boundary Satellite Boundary Microphone (Discontinued)