JBL C50PACK Surface Mount Subwoofer-Satellite Loudspeaker System
The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface mount system.
Control 52 Satellite Speakers
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
Control 50S/T Subwoofer
The 150-watt (600-watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
JBL Control 52 Satellite Speakers:
JBL Control 50S/T Subwoofer:
| Frequency Range (-10 dB) | 140 Hz – 20 kHz |
|---|---|
| Frequency Response (±3 dB) | 180 Hz – 17 kHz |
| Power Capacity | 50 Watts Continuous |
| Nominal Sensitivity | 85 dB (4.0V/1m = 1W) |
| Nominal Coverage Angle | 150° x 150° (omnidirectional) |
| Rated Maximum SPL (1m) | 94 dB average, 100 dB peak |
| Nominal Impedance | 16 ohms |
| Transducer Driver | 60 mm (2.5 in) with polypropylene cone |
| Input Connector | Removable locking 2-pin connector |
| Material | High impact polystyrene |
| Dimensions (H x W x D) | 4.5" (114.3 mm) x 3.3" (83.82 mm) x 3.75" (95.25 mm) |
| Weight (ea) | 1.5 lbs (0.68 kg) |
| Frequency Range (-10 dB) | 32 Hz – 200 Hz |
| Frequency Response (±3 dB) | 50 Hz – 150 Hz |
| Power Capacity | 300 Watts Continuous |
| Nominal Sensitivity (2.83V, 1m) | 95 dB (near corner) |
| Rated Maximum SPL (1m) | 115 dB average |
| Nominal Impedance | 8 ohms |
| Transformer Taps | 80W, 40W, 20W, (& 10W @ 70V), 8 ohm |
| Transducer Driver | 200 mm (8 in) with polypropylene cone |
| Input Connectors | Six removable locking 2-pin connectors |
| Material | Structural Plywood |
| Wall Brackets | 2.3 mm (0.9 in) thick zinc-plated |
| Dimensions (H x W x D) | 14" (355.6 mm) x 15.4" (391.16 mm) x 8" (203.2 mm) |
| Weight | 20 lbs (9.07 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
