- Description
Details
Research conducted over 10 years which was used to develop the next generation of touring systems, the Firenze Series, has also been applied to the new line of K-array speakers, the Concert Series. This groundwork led to significant advancements including the ability to digitally steer the sound, the use of an onboard touch screen and an intelligent integration of capabilities such as various stacking and hanging positions, weather resistance and integrated DSP multiple analog and digital inputs. And with the K-dante accessory, the system can be used in Dante network. The company’s signature compact design, Slim Array Technology, is also implemented. The KH2 is the smallest mid-hi line array element offered in the line. The self-powered speaker is comprised of two 8” neodymium magnet woofers each with a 2.5” voice coil and two 1.4” compression drivers with a 2.5” voice coil each. However small in size, this compact speaker can really deliver a large sound, making it a perfect solution for medium scale events in stadiums, arenas, concert halls and theatres. All components are designed by K-array and custom-made under K-array’s quality control system.
- Features
Features
- Unique performance-to-size ratio
- Self powered
- Integrated DSP with multiple analog and digital inputs
- Onboard touch screen
- Digital acoustic steering system
- Wide horizonal coverage
- RS485 and USB connectivity for remote control
- Specification
Acoustics Power Handling 750 + 250 W Max Power 2000 W Frequency Range (-10 dB) 70 Hz – 19 kHz SPL 1W/1mt 99 dB Maximum SPL 130 dB (Cont.) – 136 dB (Peak) Coverage Horizontal 110° Vertical 20° (Preset Dependent) Crossover Type Electronic Frequency 1200 Hz Transducers Type 2 X 8” Neodymium Magnet Woofer with 2.5” Voice Coil
2 X 1.4” Compression Driver with 2.5” Voice CoilAudio In/Out Analog Connectors 2 Male + 2 Female 3-Pin Balanced XLR Digital Connectors 1 Male + 1 Female 3-Pin Balanced XLR Remote Control Input Connectors 1 Male + 1 Female XLR Parallel
1 USB B Jack Serial ConverterAmplifier Type 1 Modules Class D - DSP Controlled Nominal Power Output 2 x 1000 W @ 8 Ω 1% THD + NOISE Protections Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection AC Power Nominal Power Requirements 100 - 240 Vac ± 10% 50-60 Hz Operating Range 85 – 265 Vac (Auto-Range) Consumption Power Factor (cosφ) >0.90 @ 4Ω Full Power 1/8 Rated Power (Pink Noise)@ 8Ω 300 W Certification IP 20 (53 with K-AMPCOVER Accessory) Physical Dimensions (H x W x D) 33" (838.2 mm) x 11.3" (287.02 mm) x 8.3" (210.82 mm) Net Weight 63.9 lbs (29.0 kg) - Documents
Documents
- Reviews
Write Your Own Review