A veritable tool box of dynamics processing, the SQ1D provides 8 channels of either compression or gating in a compact 3U high rack unit. This tightly integrated form factor allows the channels to be used together with ease, and includes highly flexible options for channel linking and side chain filtering and monitoring. SQ1D features multiple compression modes with combinations of RMS and Peak sensing and Hard and Soft Knee characteristics, ideal for both corrective and creative dynamics processing. In conjunction with the fully-featured noise gate and side chain options, one SQ1D can replace multiple other dynamics processors with considerable savings in space, weight and cost, with the confidence of knowing that whatever the application, SQ1D is more than capable of providing the required dynamic control of signal levels.
| Technical Specification | |
|---|---|
| Inputs | Input impedance: 10 kΩ Maximum input level: +22 dBu CMRR: -80 dB at 1kHz (typical) Connectors: 3-pin female XLR |
| Outputs | Output impedance: |
| External Key Input | |
| Input Impedance | 10 kΩ |
| Maximum Input Level | +22dBu |
| CMRR | -60 dB at 1kHz (typical) |
| Connector | 1/4" TRS |
| Solo Bus Input | |
| Input Impedance | 10 kΩ |
| Maximum Input Level | +22dBu |
| CMRR | -60 dB at 1kHz (typical) |
| Connector | 3-pin female XLR |
| Solo Bus Output | |
| Output Impedance | |
| Min Load | 2 kΩ |
| Maximum Output Level | +22 dBu @ 1 kHz |
| Connectors | 3-pin male XLR |
| Performance | |
| Frequency Response | ±0.5 dB (Input to Output), 20 Hz to 20 kHz |
| Dynamic Range | >117 dB (22 Hz to 22 kHz unweighted) |
| Noise Floor | |
| Compressor | |
| Threshold | -50 dB to +25 dBu |
| Ratio | ∞ to 1:1, with scale markings 5:1 and 2:1 |
| Attack | 100 μs to 20 ms |
| Release | 50 ms to 2.5 s |
| Make-Up Gain | 0 dB to +30 dB |
| Gate | |
| Threshold | -50 dB to +25 dBu |
| Range | -∞ to 0dB |
| Attack | 10 μs to 10 ms |
| Release | 2 ms to 2 s |
| Hold | 2 ms to 2 s |
| Sidechain Bandpass Filter | |
| Frequency Range | 40 Hz -16 kHz |
| Terminations | |
| Audio | 3-pin XLR and 1/4" TRS jack |
| Power | 3-pin IEC |
| Power Requirements | |
| Voltage | 100 to 240 VAC ±10% |
| Consumption | |
| Dimensions (H x W x D) | 5.2" (133 mm) x 19" (483 mm) x 8.9" (227 mm) |
| Weight | 10.3 lbs (4.7 kg) |
Usually arrives in 5-9 business days.
