Klark Teknik Square One Dynamics 8 Channel Dual-Mode Compressor/Gate (Discontinued)
Usually arrives in 5-9 business days.
The SQ1G is the latest evolutionary step in a process of design refinement that goes back over 40 years to the earliest KLARK TEKNIK graphic equalizers. The SQ1G features dual channel 30 band graphic equalization with fixed high-pass and low-pass filters per channel.
The SQ1G is the latest evolutionary step in a process of design refinement that goes back over 40 years to the earliest KLARK TEKNIK graphic equalizers. The enhanced Proportional-Q response recaptures that of the classic single channel DN27 graphic equalizer using modern solid-state design and manufacturing technologies, and the SQ1G features dual channel 30 band graphic equalization with fixed high-pass and low-pass filters per channel. The SQ1G provides the essential features for corrective equalization and filtering in a cost-effective package, without compromise on audio performance, and is ideal for both Front of House and stage monitoring applications, where both the gentle contouring and surgically precise high-Q notches uniquely made possible by the Proportional-Q response enhance intelligibility as well as eliminating sub-sonic rumble, room and speaker resonances and standing waves.
| Technical | |
|---|---|
| Inputs | 2 |
| Type | Electronically balanced (pin 2 hot) |
| Impedance | 20kΩ |
| Maximum Input Level | +22dBu |
| Outputs | 2 |
| Type | Electronically balanced (pin 2 hot) |
| Minimum Load Impedance | 600 Ω |
| Source Impedance | |
| Maximum Output Level | +22dBu into >2kΩ |
| Performance | |
| Frequency Response Relative to Signal at 1kHz | ±0.5 dBu 20 Hz - 20 kHz |
| EQ Out | ±0.5 dBu |
| EQ In (Flat) | ±0.5 dBu |
| Distortion (THD+N) | < 0.005% @ 1 kHz +4 dBu |
| Dynamic Range | >112 dB (20 Hz - 20 kHz unweighted, ±12 dB range) |
| Overload Indicator | +19 dBu |
| Gain Control | -∞ to +6 dBu |
| Equalisation | 30 Bands |
| Centre Frequencies | To BS EN ISO 266:1997 25Hz-20kHz, 1/3 octave tolerance ±5% |
| Maximum Boost/Cut | ±12dB |
| High Pass Filter Slope | 12 dB/octave |
| Low Pass Filter Slope | 12 dB/octave |
| Terminations | |
| Audio | 3-pin XLR and 1/4" TRS |
| Power | 3-pin IEC |
| Power Requirements | |
| Voltage | 100 to 240 VAC, 50 to 60 Hz |
| Consumption | |
| Dimensions (H x W x D) | 5.2" (132 mm) x 19" (483 mm) x 5.2" (132 mm) |
| Weight | 9.7 lbs (4.4 kg) |
Model #:
Usually arrives in 5-9 business days.