Line 6 StageSource L2t Compact 10 inch PA Speaker

Home /
Line 6 StageSource L2t Compact 10 inch PA Speaker (Discontinued)

Description

Details

With speaker performance modes, an integrated mixer and digital networking, StageSource L2t delivers best‐of‐class performance across the widest variety of live sound applications.

StageSource L2t loudspeakers use massive DSP unmatched in their class and huge power to deliver studio-quality live sound at every gig. Using six powerful DSP-based Smart Speaker modes, you can optimize the speaker’s output for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. An onboard accelerometer and pole-mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly.

The L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.

In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

Features

Features

DSP‐powered speaker performance modes for great live sound in any application.
Multi‐channel mixer with 3‐band EQ, Smart Effects and acoustic guitar modeling.
Multi‐function design fortrue scalability.
L6 LINK™ digital networking for multi‐speaker setups.
800‐watt, 2‐way, bi‐amped speaker system.
Multi‐band feedback suppression.
On‐board accelerometer and pole‐mount sensors.
Virtual Tilt‐back projects speaker’s output upwards in backline mode.
Tour‐grade plywood enclosure with M10 suspension points.
Retractable handle for easy portability.

Specification

Acoustical
System Type	10”, 2‐way, bi‐amplified loudspeaker system
Frequency Range (‐10dB)	44Hz to 19kHz, (Reference/P.A. Speaker Mode, free‐field)
Frequency Response (±3dB)	51Hz to 18kHz, (Reference/P.A. Speaker Mode, free‐field)
Maximum SPL Output	128dB peak @ 1 meter (unweighted, measured indoors with music programmaterial)
Coverage Pattern (‐6dB)	100⁰ horizontal x 50⁰ vertical
Directivity Factor (Q)	9.2 (averaged 1kHz to 16kHz)
Directivity Index (DI)	9.6dB (averaged 1kHz to 16kHz)
Crossover Frequencies	LF to HF Crossover ‐ variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
Low Frequency Transducer	10” extended range woofer, 2” diameter voice coil, 4Ω impedance
High Frequency Transducer	1” exit compression driver, 1.4” diameter voice coil and diaphragm, 8Ω impedance
Electrical – Side Panel
Input Type	2x mic/instrument XLR‐1/4”, balanced
Input Impedance (each input)	2.63 kΩ balanced (Pad = 0dB), 23.7 kΩ balanced (Pad = 20dB)
Gain Range (each input)	‐infinity to +57dB (Pad = 0dB); ‐infinity to +37dB (Pad = 20dB)
Max Input Level	+25dBu (Gain at minimum ‘on’ position, 20dB pad on)
Controls	2x Gain, 20dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level,Feedback Suppression
Indicators	2x Signal Present/Clip, 2x Feedback Suppression1x Acoustic Modeling
Electrical – Rear Panel
Input Types	Line‐level XLR‐1/4”, balanced, Stereo RCA, unbalanced, L6 LINK™ XLR
Input Impedance	100 kΩ balanced, 20 kΩ balanced
Max Input Levels	+20dBu, +16dBV
Onset of Limiting	+6dBu input, ‐6dBu input
Output Types	Balanced Loop Thru XLR, Balanced Mix Out XLR, L6 LINK XLR
Output Impedances	Source‐dependent, 680Ω balanced
Controls	Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
Indicators	Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode,L6 LINK Status
Digital Signal Processing
Speaker Modes	Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
On‐board Effects	Reverb, Modulation, Feedback Suppression, Acoustic Modeling
Transducer Protection	Excursion limiting, thermal limiting
Digital Networking	L6 LINK intelligent speaker networking system
Sensors	Speaker orientation, pole sensor, power amp temperature, power supplytemperature
Power Amplification and Supply
HF & LF, Output Channel
Power Amplifier Type	Class AB, Class D
Peak Output Power1	175 watts, 655 watts
Power Supply Voltage Range	100 ‐ 240 VAC, ± 10%, 50/60Hz , automatic voltage selection
Power Consumption	250 watts (1/8th power)
Cooling	Digitally controlled, variable‐speed 50 mm fan
Protection	Output overcurrent, overtemperature, DC fault
Mechanical
Enclosure	15 mm enclosure, 18 mm baffle, multi‐ply hardwood, textured black paint, bassreflex design
Floor Monitor Upward Angle	60⁰ using kickstands, 30⁰ using handle
Suspension Points	M10 x 1.5 threaded inserts, qty: 4
Pullback Point	M10 x 1.5 threaded insert, qty: 1
Grille	18‐gauge perforated steel, black powder coat finish
Pole Cup	35 mm pole cup with sensor
Dimensions (HxWxD)	23.75” (603 mm) x 12.25” (312 mm) x 12.25” (312 mm)
Weight	39.1 lb (17.7 kg)

Reviews