Line 6 StageSource L3t 3 Way Tri-Amped PA Speaker

Home /
Line 6 StageSource L3t 3 Way Tri-Amped PA Speaker (Discontinued)

Description

Details

StageSource® L3t is designed to be the world’s most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3t output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly.

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3t to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify set up. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

The L3t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L3t delivers all of the tools you need for great live sound.

Features

Features

1,400‐watt, 3‐way, tri‐amped speaker system
Smart Speaker Modes for great live sound in any live sound situation
Multi‐channel mixer with 3‐band EQ, Smart Effects, and acoustic guitar modeling
Multi‐band feedback suppression
On‐board accelerometer and pole‐mount sensors
Virtual Tilt‐back projects the speaker’s output upwards in backline mode
L6 LINK™ digital networking for multi‐speaker setups
Multi‐function design for true scalability
Dual‐braced tour‐grade plywood enclosure with M10 suspension points
Retractable handles for easy portability

Specification

Acoustical
System Type	Dual 10h, 3-way, tri-amplified loudspeaker system
Frequency Range (‐10 dB)	40 Hz to 19 kHz, (Reference/P.A. Speaker Mode, free‐field)
Frequency Response (}3 dB)	47 Hz to 18 kHz, (Reference/P.A. Speaker Mode, free-field)
Maximum SPL Output	132 dB peak @ 1 meter (unweighted, measured indoors with music program material)
Coverage Pattern (‐6 dB)	100⁰ horizontal x 50⁰ vertical
Directivity Factor (Q)	8.7 (averaged 1 kHz to 16 kHz)
Directivity Index (DI)	9.4 dB (averaged 1 kHz to 16 kHz)
Crossover Frequencies	LF1 Low‐pass ‐ 250 Hz, LF2 to HF Crossover ‐ variable, 2.2 kHz to 7.0 kHz
Low Frequency Transducers	2 x 10" extended range woofer, 2" diameter voice coil, 4Ω impedance
High Frequency Transducer	1" exit compression driver, 1.4" diameter voice coil and diaphragm, 8Ω impedance
Electrical – Side Panel
Input Type	2x mic/instrument XLR‐1/4", balanced
Input Impedance (each input)	2.63 kΩ balanced (Pad = 0 dB), 23.7 kΩ balanced (Pad = 20 dB)
Gain Range (each input)	‐infinity to +57 dB (Pad = 0 dB); ‐infinity to +37 dB (Pad = 20 dB)
Max Input Level	+25 dBu (Gain at minimum ‘on’ position, 20 dB pad on)
Controls	2x Gain, 20 dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level
Indicators	2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode,1x Acoustic Modeling On/Off
Electrical – Rear Panel
Input Types	Line‐level XLR‐1/4", balanced, Stereo RCA, unbalanced, L6 LINK™ XLR
Input Impedance	100 kΩ balanced 20 kΩ balanced
Max Input Levels	+20 dBu +16 Dbv
Onset of Limiting	+7 dBu input, ‐5 dBu input
Output Types	Balanced Loop Thru XLR, Balanced Mix Out XLR, L6 LINK XLR
Output Impedances	Source‐dependent, 680 Ω balanced
Controls	Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
Indicators	Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode,L6 LINK Status
Digital Signal Processing
Speaker Modes	Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
On‐board Effects	Reverb, Modulation, Feedback Suppression, Acoustic Modeling
Transducer Protection	Excursion limiting, thermal limiting
Digital Networking	L6 LINK Intelligent Speaker Networking System
Sensors	Speaker orientation, pole sensor, power amp temperature, power supply,temperature
Power Amplification and Supply
LF1, LF2, HF, Output Channel
Power Amplifier Type	Class D, HF (Class AB )
Peak Output Power1	655 Watts, HF(175 Watts)
Power Supply Voltage Range	100 ‐ 240 VAC, ± 10%, 50/60 Hz , automatic voltage selection
Power Consumption	250 watts (1/8th power)
Cooling	Digitally‐controlled, variable speed 50 mm fan
Protection	Output overcurrent, overtemperature, DC fault
Mechanical
Enclosure	15 mm enclosure, 18 mm baffle, multi‐ply hardwood, textured black paint, bassreflex design
Floor Monitor Upward Angle	60⁰ using kickstands, 30⁰ using handle
Suspension Points	M10 x 1.5 threaded inserts, qty: 4
Pullback Point	M10 x 1.5 threaded insert, qty: 1
Grille	18 gauge perforated steel, black powder coat finish
Pole Cup	35 mm pole cup with sensor
Dimensions (HxWxD)	33.875” (861 mm) x 12.25” (312 mm) x 12.25” (312 mm)
Weight	57.5 lbs (26.1 kg)

Reviews