- Description
Details
The Listen Tech LR-400 Portable Display RF Receiver is a lower cost digital display receiver. It has the same exceptional audio quality and convenient recharging options as Listen's other full-featured receivers. The LR-400-072 can receive up to 17 wide band channels with 40 narrow band. The LR-400-072 has a digital display (LCD) to monitor channel selection, battery level, and signal strength. An LED on top of the receiver indicates if the unit is on, when batteries are low or if the unit is locked on a channel. It has channel SEEK capability and is compatible with mono or stereo earphones.
This product is approved by the FCC for use in the US. Please note that they cannot be used in all countries. Check with your local government or specific regulation with regard to broadcast frequency in your specific country. Note: FCC rules limit the use of this product to assistive listening.- Features
Features
- Superior audio quality – 80 dB signal-to-noise ratio (SNR), setting the industry’s sound quality standard
- 57 channels
- 100 % Digital – Listen receivers are digitally-tuned so the transmission won’t drift
- Limited Lifetime Warranty with hassle-free support
- Look & Listen LCD shows channel, battery status, and signal strength
- Uses standard alkaline or nickel-metal hydride (NiMH) batteries
- Built in SmartCharge won’t allow batteries to overcharge. Charging circuitry is conveniently built into Listen’s receivers
- Drop in charging contacts for any of Listen’s many charging cases or a charging plug on the side of the unit
- Many accessory options make Listen products ideal for a wide range of applications
- Specification
RF RF Frequency Range 72.025 - 75.950 MHz Number of Channels 17 wide band, 40 narrow band Sensitivity .6uV typical, 1 uV maximum for 12 dB sinad Frequency Accuracy ± .005% stability 32 to 122 ºF (0 to 50 ºC) Antenna Uses earphone cable Squelch Programmable in 20 steps, automatic on loss of RF signal Compliance FCC Part 15, Part 90, Industry Canada, RoHS Audio System Frequency Response 50 Hz - 15 kHz (±3 dB) System Signal to Noise Ratio SQ enabled 80 dB, SQ disabled 60 dB System Distortion <2% total harmonic distortion (THD) at 80% deviation Output 0.14" (3.5 mm) connectors, unbalanced, 0 dBu nominal output level,16 mW maximum, impedance 32 ohm Controls User Controls Channel up/down, SEEK, volume Set-up Controls (Battery Compartment) Alkaline/NiMH batteries, SQ enable/disable Programming Channel lock, squelch Indicators LED Red, illuminated when unit is on, flashes when batteries are low or to indicate charging LED Flashes when locked and SEEK is pushed Display Channel designation, battery level, battery charging, RF signal strength and channel lock Battery Type Two (2) AA batteries, alkaline or NiMH Battery Life (Listen Batteries) 30 hours alkaline (LA-361), 15 hours NiMH rechargeable (LA-362) Battery Charging (NiMH only) Fully automatic, 13 hours Power Power Supply I/P 120 VAC; O/P 7.5 VDC 250 mA, drop in contact points for use with charging cases Power Supply Connector 0.09" (2.3 mm) OD by 0.7 mm ID, barrel type connector 7.5 VDC Power Supply Connector center positive <250 mA, drop in contact points for use with Listen charging cases Power Supply Compliance RoHS, WEEE, UL, PSE, CE, CUL, TUV, CB Environmental Temperature - Operation 14 to 104 ºF (-10 to 40 ºC) Temperature - Storage (-)4 to 122 °F (-20 to 50 °C) Humidity 0 to 95% relative humidity, non-condensing Physical Color Dark Grey with white silk screening Door Manually lockable, SEEK/channel select behind the door Dimensions (H x W x D) 4.25" (108 mm) x 2.75" (70 mm) x 1.50" (38 mm) Weight 0.24 lbs (111 g) Weight with Batteries 0.36 lbs (164 g) Shipping Weight 0.38 lbs (173 g) - Reviews
Write Your Own Review