- Description
Details
Radial Engineering ProD8 Eight-Channel Rackmount Direct Box
The ProD8 is a high-density rackmount 8-channel 19" direct box that is specifically designed to interface keyboards and pre-recorded backing tracks to the PA system with redundant inputs for live performance back-up.
The ProD8's input panel is equipped with two A-B ¼" inputs per DI channel for main and backup sources, throughput for personal monitoring and an effects loop that allows both A-B sources to share the same effects for each channel. The output panel features an XLR connector, -15dB input pad selector and ground lift switch. A 180º polarity reverse switch is internally mounted and factory set with pin 2 hot. Completely passive, the ProD8 employs eight custom wound Radial Engineering transformers that are linear from 20Hz to 18kHz and able to withstand highly dynamic levels from sources such as digital samplers and drum machines without flinching. To reduce interference from outside magnetic fields, the transformers are equipped with a mu-metal-nickel outer shield thus reducing phase distortion to an absolute minimum.
⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Features
Features
- Eight Radial Engineering DI's in a high density rack format
- Redundant input conectors for 'main' and 'backup' inputs
- Custom Radial Engineering transformers for linear performance
- Designed to handle highly dynamic sources
- Rack ears reverse so either panel can face front
- Specification
Channels 8 Transformers Eclipse ET-DB2, 12:1 ratio Output Connectors XLR connector Input Connectors 1/4" Frequency Response 20Hz ~ 18.5kHz (± 0.2dB) Dynamic Range 128dB Dimensions (H x W x D) 1.75" (44.45 mm) x 19" (486.2 mm) x 6.25" (158.75 mm) Weight 7.2 lbs (3.26 kg) - Documents
Documents
- Reviews
Write Your Own Review