Accessories

The Aviom MT-1a attaches with three screws to the bottom of an A360 Personal Mixer, A320 Personal Mixer, A-16II Personal Mixer, or A-16CS Control Surface and mounts on any standard mic stand with the ring nuts supplied.

The Gator Cases G-MIXERBAG-0909 bag is 9" x 9" x 2.75" and can hold a mixer or general gear.

Provides power for the Bose ToneMatch audio engine when used with an L1 Compact or L1 Model I system, or for stand alone use. Power rating: AC 100–230V~.

The Yamaha RKMG12 Rackmount kit is designed for the MG12 and MG12XU mixing consoles. The two metal rack-mount supports are screwed onto both sides of the console to mount the unit into the rack.

The Yamaha M770 Mixer Stand Tripod stand with adapter is made to attach to MG102C, MG82CX, Stagepas 400i and Stagepas 600i.

The Gator Cases G-MIXERBAG-1306 padded mixer carrying bag measures 13.1" x 6.25" x 6".

To light your rack, the Atlas Sound AP-GNL18 is a 16" gooseneck LED lamp with XLR connection for use with ECS-6RM, ECS-3, and other models. LED lamps are far superior in terms of longevity, as well as heat reduction, when compared to traditional incandescent lamps. Additionally, the XLR base mounts are also superior to the commonly used BNC type base.

To light your rack, the Atlas Sound AP-GNL18 is a 16" gooseneck LED lamp with XLR connection for use with ECS-6RM, ECS-3, and other models. LED lamps are far superior in terms of longevity, as well as heat reduction, when compared to traditional incandescent lamps. Additionally, the XLR base mounts are also superior to the commonly used BNC type base.

The Gator Cases G-MIXERBAG-1815 bag is 18" x 15" x 6.5" and can hold a mixer or general gear.

Reliability has been the absolute cornerstone of Yamaha’s digital mixing console development, but there was always one component we knew would fail first; the lamp bulbs!

This Gator Cases G-MIXERBAG-2621 padded nylon carrying bag is designed for large format mixers up to 26" x 21" x 8.5".

This Gator Cases G-MIXERBAG-3121 padded nylon carrying bag is designed for large format mixers up to 31" x 21" x 7".

The Gator Cases G-MIXERBAG-3621 large format mixer carry bag measures 36" x 21" x 8".

The K&M 28075 is a heavy-duty, foldable stand for amplifiers and mixers, with a spring-loaded locking bolt and locking screw, and felt-lined supporting brackets.

The Gator Cases G-TOURX32NDH road case is custom made to fit the Behringer X32 mixing console.

The Gator Cases G-TOURM32RNDH road case is specially built to fit the Midas M32R.

The Yamaha NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network.

The Rane DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices.

The Gator Cases G-TOURPESL32IIINDH road case is specially built to fit the Presonus StudioLive 32 Series III digital mixer.

The Allen & Heath Audinate Dante 64x64 Dante card is a 64 channel audio networking option card for the dLive range.

The Yamaha Dugan-MY16 is a 16-channel automatic mixing controller that plugs into a slot on Yamaha consoles.

Designed to help integrate dLive into a wide range of live, installed and broadcast scenarios, the Allen & Heath Dante 128x128 audio networking card offers low latency, high channel count connectivity to Dante networks and devices using standard networking cabling and hardware.