- Description
Details
The KLA12 features a highly efficient 500 watt by 500 watt power amp module. This efficient design enables up to five KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit. It has a 90' x 18' nominal coverage angle and features a self contained rigging system. It is available in black or white.
The QSC KLA181 18 inch Subwoofer offers highly efficient power amp module in a 1,000 watt configuration. This efficient design enables up to five KLA models to be driven off of a single 15 amp, 120 volt electrical circuit. In addition to DEEP DSP algorithm, GuardRail, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer includes a polarity switch to optimize summation between subwoofer and top-boxes. As an energy saving feature, the Auto Standby mode automatically engages after five minutes of inactivity but upon resumption of audio signal, the power module on the KLA will awaken instantly for immediate output.
The KLA loudspeakers incorporate QSC's DEEP DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail circuitry protection which prevents the amplifier module from unnatural and destructive clipping. As an energy saving feature, the Auto Standby mode automatically engages after five minutes of inactivity but upon resumption of audio signal, the power module on the KLA will awaken instantly for immediate output.
In an installed application, multiple KLA Series loudspeakers can be "daisy-chained" for total gain control from a single remote pot wired to the on-board Phoenix-style connector. Additional power module characteristics on KLA include a balanced, line-level XLR input in parallel with an XLR "Thru" connector, PowerCon™ In and Thru connectors, Attenuation Control and LED indicators for Signal, Limit, Power and Standby status.
For maximum deployment flexibility, KLA loudspeakers can be either ground deployed or flown. As a ground stack, up to two KLA12 enclosures can be mounted over the KLA181 or the KW181 subwoofer via a threaded pole socket, or without a sub using an appropriately rated loudspeaker stand.- Features
Features
QSC KLA12 Line Array Speaker:
- 500W x 500W power module
- Rugged, ABS enclosure delivers light-weight durability
- SOLO Rigging System supports deployment without tools or external hardware
- Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 12:1 design factor supports arrays of up to five units
- 90 degrees x 18 degrees nominal coverage (requires only five boxes to configure a 90 degrees x 90 degrees array)
- High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
- PowerCon Input and Thru connections
- Tilt-Direct pole mount assists directivity in single-unit applications
QSC KLA181 Active Flyable Subwoofer:
- 1,000 watt power module
- 18" vented subwoofer
- High acoustic output (135 dB SPL peak)
- Frequency range down to 33 Hz (-10 dB)
- Extensive DSP further enhances and protects performance
- PowerCon Input and Thru connections
- Threaded pole-cup receptacle for free-standing applications
- Suspension made possible via M10 fittings or KLA12AF Array Frame
- Integrated threaded pole mount supports up to two KLA12 enclosures
- Specification
KLA12 Speaker Configuration 2-Way Line Array Element Transducers Low-Frequency: 12" cone transducer
High-Frequency: 1.75" diaphragm compression driverFrequency Response (-6 dB) 49 Hz - 18 kHz Frequency Range (-10 dB) 44 Hz - 20 kHz Nominal Coverage (-6 dB) 90° H x 18° V Maximum SPL (1 meter) 131 dB Power Output 500W x 500W power module Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced Indicators Power, Signal, Standby, Limit Cooling On demand, 50 mm variable speed fan Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ Transducer Protection Thermal limiting, excursion limiting AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz AC Power Consumption 1/8 Power 100 VAC, 2.3 A,120 VAC, 2.01 A,230 VAC, 1.13 A Finish Black or White paint Grille Black or White powder coated 18 gauge steel Dimensions (H x W x D) 15" (381 mm) x 23.4" (594 mm) x 16.6" (422 mm) Net Weight 55 lbs (25 kg) KLA181 Subwoofer Transducers Low Frequency 18" cone transducer Frequency Response (-6 dB) 38 Hz Frequency Range (-10 dB) 33 Hz Maximum SPL (1 meter) 135 dB peak Power Output 1000W Class D continuous Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced Indicators Power, Signal, Standby, Limit Cooling On demand, 50 mm variable speed fan Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ Transducer Protection Thermal limiting, excursion limiting AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz AC Power Consumption (1/8 Power) 100 VAC, 2.3 A,120 VAC, 2.01 A,230 VAC, 1.13 A Finish Black or White textured paint Grille Black or White powder coated 18 gauge steel Dimensions (H x W x D) 21.6" (547 mm) x 23.1" (586 mm) x 25.7" ( 633 mm) Net Weight 100 lbs (45.3 kg) - Reviews
Write Your Own Review