- Description
Details
The TX1122FM is a compact, high output dedicated floor monitor for use on small to medium-sized stages where high quality vocal and instrument applications are required in a lightweight package.
The TX1122FM enclosure utilizes Signal Synchronized Transducers (patent pending), a design that aligns the woofer and compression driver by locating them on separate baffles, and integrates a low distortion port between the baffles. This offers tremendous advantages over traditional flat baffle construction: the acoustic centers of the woofer and compression driver are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint.
The TX1122FM utilizes the DH3, a high output 1.25" titanium compression driver, coupled to a Constant Directivity™ 90° x 50° horn. The SMX2121 12" woofer has an FEA optimized magnet structure and shorting ring for ultra low distortion. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and has a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover result in a compact floor monitor that is capable of very high output levels levels before feedback.
The TX1122FM has a variety of features that make it well suited as a dedicated floor monitor. The internally braced enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoatTM for maximum strength and durability.- Features
Features
- Two-way, high-output design
- Vented LF enclosure
- Neutrik Speakon® paralleled pass-through connectors
- Two integrated handles
- Ideal for small-to-medium stages
- Signal Synchronized Transducers™ for woofer/tweeter alignment
- Low-distortion SMX2121 woofer with fully symmetric drive
- 1.25" DH3/2010A titanium HF compression driver
- Constant-directivity 90º H x 50º V horn
- Integrated 24 dB/octave crossover with HF protection
- 99 dB sensitivity, 132 dB maximum SPL
- Power handling: 500W continuous, 2000W peak
- Black EVCoat™ finish
- Specification
Frequency Response (-3 dB) 70 Hz - 20 kHz Frequency Range (-10 dB) 55 Hz - 20 kHz Rec. High-Pass Frequency 60 Hz Axial Sensitivity 99 dB (1W/1m) Max. Calculated SPL 132 dB Horizontal Coverage 90° Vertical Coverage 50° Power Handling 500W Continuous, 2000W Peak LF Transducer SMX2121, 12" (305 mm) Driver HF Transducer DH3, 1.25" (32 mm) Diaphragm Compression Driver Crossover Frequency 1600 Hz Nominal Impedance 8 Ohms Minimum Impedance 6.4 Ohms Connectors (2) Neutrik Speakon NL4’s Enclosure Material Plywood and MDF with EVCoat Grille 16 GA Steel, Black Powdercoat, with Rotatable Logo Dimensions (H x W x D) 17.3" (440 mm) x 14.3" (364 mm) x 22.6" (573 mm) Net Weight 43.7 lbs (19.8 kg) Shipping Weight 49.2 lbs (22.4 kg) - Documents
Documents
- Reviews
Write Your Own Review