The mixer and 60 W power amplifier is powered via switchable 115VAC or 230VAC @ 50/60Hz or 24VDC. Includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level. Includes rackmount kit for 19" rack.
| AC Supply Voltage | 115 or 230 VAC (rear panel switchable); ±10%, 60Hz |
|---|---|
| DC Supply Voltage | 24 VDC (Max. 10% deviation) |
| Power Consumption | 150 W (AC); 5A (DC) |
| Speaker Level Outputs | Screw terminal strip, 4 ohms, 8 ohms, 25 V, 70 V; 60 W RMS |
| Tape Outputs | Dual parallel RCA-phono jacks, 1V @ 4.7 k ohms |
| Preamp (“Pre”) Outputs | Dual parallel RCA-phono jacks, 1V @ 600 ohms |
| Unswitched AC Outlet | 500 W maximum |
| MIC Inputs 1–5 | XLR receptacle or screw terminals, 1m V @ 600 ohms balanced |
| AUX Inputs 1-6 | Dual parallel RCA-phono jacks, stereo converted to mono, 150 mV @22 k ohms |
| Telephone Input 7 | Screw terminal strip, 150 mV @ 600 ohms balanced |
| Power Amp In | RCA-phone jack, 1V @ 8k ohms |
| Frequency Response | 50 Hz – 20 kHz ±3 dB (Test signal inserted at AUX input) |
| Total Harmonic Distortion | Less than 1% at 1 kHz at rated power |
| Signal to Noise Ratio | 80 dB (Test signal inserted at AUX 6 input); 60 dB (Test signal inserted at MIC 1 input) |
| Tone Controls | Bass ±10 dB @ 100 Hz, Treble ±10 dB @ 10 kHz |
| Phantom Power | 16 VDC, shipped from factory with internal phantom power jumpers set “ON” for channels 1-5 |
| Priority Muting | Three levels of priority. See “Amplifier Muting–Priority Scheme” in Installation Instructions |
| Dimensions (H x W x D) | 3.5" (88.9 mm) x 17" (431.8 mm) x 13.5" (342.9 mm) |
| Weight | 17.0 lbs (7.7 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
