Peavey IPR2 7500 Power Amplifier

Name: Peavey IPR2 7500 Power Amplifier
Brand: Peavey
SKU: PEAVEY-03004250
Price: 1449.99 USD
Availability: InStock

Write a Review

Part #:

03004250

Model #:

IPR2 7500

Current Stock:

Availability: Usually arrives in 5-9 business days.

Quantity:

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The Peavey IPR2 7500 is a Power Amplifier designed for years of reliable, flawless operation under rigorous use. Its advanced design allows it to be lighter in weight while increasing output power, reliability and thermal efficiency.

Description

The Peavey IPR2 7500 is designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design.

Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2 7500's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.

Features

Two-channel independent, fourth-order Linkwitz-Riley crossovers
DDT (Distortion Detection Technique) protection
Revolutionary IPR class D topology
Detented input controls
Combination XLR 1/4" inputs
Four pole twist lock output connectors
Ultra-light weight
Individual signal pass 1/4" jacks on each channel
LED illuminated
Standby, LED power present indication

Specifications

Rated Power (2 x 2 ohms)	4750 W 20ms repetitive burst / 3750 W 1% THD both channels driven @ 1kHz
Rated Power (2 x 4 ohms)	2800 W 20ms repetitive burst / 2450 W 1% THD / 2020 W 0.15% THD, both channels driven @ 1kHz
Rated Power (2 x 8 ohms)	1550 W 20ms repetitive burst / 1425 W 1% THD / 1200 W 0.15% THD, both channels driven @ 1kHz
Rated Power (1 x 2 ohms); Rated Power (2 x 2 ohms)	3850 W RMS; 3750 W RMS
Rated Power (1 x 4 ohms); Rated Power (2 x 4 ohms)	2400 W RMS; 2022 W RMS
Rated Power (1 x 8 ohms); Rated Power (2 x 8 ohms)	1330 W RMS; 1250 W RMS
Minimum Load Impedance	2 ohms
Maximum RMS Voltage Swing	124 volts
Frequency Response	20Hz - 25kHz; +0dB, -3dB
20Hz - 20kHz (2 x 2 ohms)
20Hz - 20kHz (2 x 4 ohms)
20Hz - 20kHz (2 x 8 ohms)
Input CMRR	> - 75 dB @ 1 kHz
Voltage Gain	x 40 (+32 dB)
Crossover	100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel
Crosstalk	> -85 dB @ 1 kHz at 1000 W power @ 8 ohms
Hum and Noise	> -106 dB, "A" weighted referenced to rated power @ 4 ohms
Slew Rate	> 12V/μs
Damping Factor (8 ohms)	> 200:1 @ 20 Hz - 1 kHz at 8 ohms
Input Sensitivity	2.25 volts +/- 3% for 1 kHz 4 ohm rated power. 2.195 volts +/- 3% for 1 kHz 2 ohm rated power
Input Impedance	20k ohms balanced and 10k ohms unbalanced
Current Draw @ 1/8 in VA (watts)	2210 (1440) @ 2 ohms, 1550 (950) @ 4 ohms, 982 (560) @ 8 ohms
Current Draw @ 1/3 in VA (watts)	4260 (3150) @ 2 ohm, 3120 (2160) @ 4 ohms, 1890 (1200) @ 8 ohms
Idle Consumption	250VA, 120 watts
Cooling	3 temperature dependent variable speed fans
Controls	2 front panel attenuators, crossover select switch for HPF, Normal and LPF
Indicator LEDs	Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection	Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors	Inputs: Dual Combination 1/4” XLR,Outputs: Dual 1/4” signal patch,Dual 2-pin twist-lock connectors
Construction	0.062” thick aluminum
Dimensions	3.5" H x 19.0" W x 17.0" D behind front panel + 0.6” for handle (89 mm x 483 mm x 432mm)
Weight	14.6 lbs (6.6 kg)
Shipping Dimensions	21.2" H x 21.0" W x 6.0" D (538 mm x 533 mm x 152 mm)
Shipping Weight	18.4 lbs (8.34 kg)