Presonus AudioBox 22VSL Advanced USB 2.0 Recording System (Discontinued)
Usually arrives in 5-9 business days.
Using your computer CPU and PreSonus Virtual StudioLive (VSL) software, AudioBox VSL-series interfaces provide reverb and delay effects and the same Fat Channel compression, limiting, semi-parametric EQ, and high-pass filter, as the PreSonus StudioLive 16.0.2 digital mixer all with inaudible latency.
Furthermore, thanks to the power of VSL, the AudioBox 44VSL includes an 8x4 software mixer. As a result, with just an AudioBox 44VSL and your laptop or other computer running VSL, you can mix a studio session or a live show featuring, say, a guitar duo with vocals, a small band, a DJ rig with mixer and stereo synthesizer, or a panel discussion all while monitoring and recording with or without real-time effects.
And you can do it simply and easily, with no hardware mixer, no outboard effects rack, and minimal wiring, thanks to the tight integration between PreSonus hardware and software.
To top it off, while the classic PreSonus AudioBox USB is a fine-sounding unit, the new AudioBox VSL series sounds even better, with 24-bit, 96 kHz recording and top-of-the-line PreSonus XMAX preamps. We’ll have more to say about the preamps shortly.
Tracking without hearing effects and signal processing is like playing a video game with your eyes closed. Musicians rely on aural cues when performing, and their performance can vary depending on what they hear in their monitors.
Adding just the right amount of compression, EQ, and reverb can make a huge difference in their ability to hear themselves clearly and to experience their performance as if it occurred in a natural space rather than in the artificial sonic environment of the studio. The result is a better performance and ultimately a better recording.
| Microphone Inputs | Specifications |
|---|---|
| Connector Type | Combo, XLR, female, balanced |
| Mic Preamp EIN | -133 dB, 20 kHz BW, max gain, Rs=40Ω, A-wtd |
| Frequency Response | 20 Hz - 22 kHz, ±0.25 dB, unity gain |
| THD+N | 0.002%, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtd |
| S/N Ratio | 97 dB, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtd |
| Gain Control Range | -15 dB to +65 dB |
| Input Max Headroom | +16 dBu, < 0.5% THD |
| Input Impedance | 1.7 kΩ |
| Phantom Power | +48 VDC, 32 mA total unit |
| Line Inputs | Specifications |
| Connector Type | Combo, ¼” TRS, female, balanced |
| Frequency Response | 20 Hz - 22 kHz, ±0.25 dB, unity gain |
| THD+N | 0.002%, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtd |
| S/N Ratio | 98 dB, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtdq |
| Gain Control Range | -20 dB to +20 dB |
| Input Max Headroom | +21 dBu, < 0.5% THD |
| Input Impedance | 10 kΩ |
| Instrument Inputs | Specifications |
| Connector Type | Combo, ¼” TS, female, unbalanced |
| Frequency Response | 20 Hz - 22 kHz, ±0.25 dB, unity gain |
| THD+N | 0.003%, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtd |
| S/N Ratio | 89 dB, +4 dBu, 1 kHz, unity gain, 22 kHz BW, A-wtd |
| Gain Control Range | -30 dB to +50 dB |
| Input Max Headroom | +21 dBu, < 0.5% THD |
| Input Impedance | 1 MΩ |
| Analog Outputs | Specifications |
| Connector Type | ¼” TRS, female, impedance balanced |
| Frequency Response | 20 Hz - 22 kHz, ±0.25 dB |
| THD+N | 0.003%, 1 kHz, 22 kHz BW, A-wtd |
| S/N Ratio | 109 dB, 1 kHz, 22 kHz BW, A-wtd |
| Output Level | +10 dBu, |
| Output Impedance | 51Ω |
| Headphone Outputs | Specifications |
| Connector Type | ¼” TRS, female, stereo |
| Maximum Power | 120 mW/ch @ 60Ω load |
| Frequency Response | 20 Hz - 20 kHz, ±0.5 dB, max gain |
| THD+N | 0.01%, 1 kHz, max gain, 20 kHz BW, A-wtd |
| S/N Ratio | 96 dB, 1 kHz, max gain, 20 kHz BW, A-wtd |
| Digital | Specifications |
| ADC Dynamic Range | 114 dB, 48 kHz, A-wtd |
| DAC Dynamic Range | 114 dB, 48 kHz, A-wtd |
| Host Interface | USB 2.0 high-speed |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| Maximum Latency | 6 ms, analog input to analog output |
| MIDI I/O | 5-pin DIN connectors |
| Power | Specifications |
| External Power Adapter | +12 VDC, 1 A, center-positive (included) |
| Connector Type | Barrel: 5.5 mm OD, 2.1 mm ID, 9.5 mm length |
| Physical | Specifications |
| Dimensions | 1/2U rack-mount (with standard rack tray, not included) |
| Height | 1.75” (44.45 mm) |
| Depth | 5.5” (139.7 mm) |
| Width | 9.5” (241.3 mm) |
| Weight | 2.6 lb. (1.2 kg) |