PreSonus DigiMax DP88 8-Channel A/D/A Converter with Remote Preamps (Discontinued)
Usually arrives in 5-9 business days.
The PreSonus DigiMax D8 is an 8-channel microphone preamplifier with 24-bit ADAT optical output which provides an excellent front-end or expander for ADAT optical-equipped digital audio devices. The DigiMax D8 delivers incredibly high headroom, deep lows, smooth highs, and a rich overall sound.
The PreSonus DigiMax D8 is an 8-channel microphone preamplifier with 24-bit ADAT optical output which provides an excellent front-end or expander for ADAT optical-equipped digital audio devices, such as the AudioBox 1818VSL, Studio 192, and Studio 192 Mobile audio/MIDI interfaces. For more than a decade, DigiMax-series preamp/converters have been relied on in countless recording studios worldwide. Based on the highly lauded XMAX Class A solid-state preamp, the DigiMax D8 has become a classic, offering eight of these prized preamps - enough to raise your entire studio rig to a higher level.
A good microphone preamp boosts a mic's level to almost 400 times that of the original signal, making the preamp one of the most important stages in an audio system. A cheap, off-the-shelf, op-amp-type mic preamp delivers thin, noisy, harsh results. In contrast, PreSonus® XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound. With XMAX preamps, your system's sound quality is limited only by the microphone you plug in.
Its complement of inputs and outputs makes the DigiMax D8 a versatile front-end for virtually any system. Two convenient front-panel instrument inputs let you plug in guitars, bypassing the mic inputs. All other connections are in the rear, keeping the wiring out of your face. With eight XLR mic/line inputs, you can plug in virtually any mic- or line-level sound source. Eight 1/4", balanced, direct channel outputs allow you to add preamps to devices with line-level inputs or split the mic preamps between two devices.
Eight-channel, 24-bit, 44.1/48 kHz ADAT Optical ("Lightpipe") output makes the DigiMax D8 an excellent way to add more analog inputs to any third-party, Lightpipe-equipped digital-audio device. Better yet, add a DigiMax D8 to a Lightpipe-equipped PreSonus AudioBox 1818VSL for a 2-rack space rig with 16 XMAX-equipped recording channels - enough to record an entire live band. To keep your digital audio in sync with ultra-low jitter, the D8 receives word clock at its BNC connection and sends word clock via ADAT Optical.
The DigiMax D8 is a proven solution for adding eight professional microphone preamplifiers to any digital recording system. You can easily integrate it into your studio, thanks to plentiful I/O, variable trim control for each preamp, 48V phantom power (switchable in odd-even pairs), fast-acting LED metering, and a 20 dB pad. And you'll love its sound!
| Input Type | XLR Female Balanced |
|---|---|
| Frequency Response | 20 Hz to 50 kHz (±0.5 dB) |
| Frequency Response | 20 Hz to 150 kHz (±3.0 dB) |
| Input Impedance (Balanced) | 1600Ω |
| THD+N | < 0.003% (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) |
| EIN | -126 dBu (unwtd, 55 dB Gain, 150Ω Input, 20 Hz to 22 kHz) |
| S/N Ratio | >101 dB (unity gain, unwtd, Ref. = +4 dBu, 20 Hz to 22 kHz) |
| Common Mode Rejection Ratio | > 55 dB (1 kHz, 55 dB gain) |
| Gain Control Range | -4 dB to 50 dB (±1 dB) |
| Maximum Input Level | +14 dBu (unity gain, 1 kHz @ 0.5% THD+N) |
| Signal Level LEDs | +10 dBu (0 dBFS) |
| Red/Clip | +4 dBu (-6 dBFS) (±0.5 dBu) |
| Yellow | -8 dBu (-18 dBFS) (±0.5 dBu) |
| Green | -14 dBu (-24 dBFS) (±0.5 dBu) |
| Phantom Power | +48 VDC (±2 VDC) |
| Type | 1/4" TRS Female Unbalanced |
| Input Impedance | 1 MΩ |
| Type | 1/4" TRS Balanced |
| Output Impedance | 51Ω |
| ADC Dynamic Range | 107 dB (a-wtd, 48 kHz sample rate) |
| Bit Depth | 24 |
| Reference Level for 0 dBFS | +10 dBu |
| Internal Sample Frequency, Selections | 44.1, 48 kHz |
| External Sample Frequency, Input | 75Ω BNC |
| Input Connector Type | IEC |
| Input Voltage | 90 to 230 VAC (factory configured) |
| Power Requirements | 20W (continuous) |
| Mount Style | Rack-mountable, 1RU |
| Dimensions (H x W x D) | 1.75” (44.45 mm) x 19” (482.6 mm) x 7” (177.8 mm) |
| Weight | 6 lbs (2.72 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.