More Views

QSC CX1202V Power Amplifier (Discontinued)

Part # CX1202V
Model # CX1202V
The CX1202V Power Amplifier is designed to meet the specialized needs of sound contractors. It features PowerLight switch mode power supply technology, gain control security panels and a 70 volt direct model.
Description

Details

The CX1202V 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the ground up, combining QSC's exclusive PowerLight® technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX Series is the ideal solution to any permanently installed sound system.

The CX1202V provides direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems.

The CX1202V amplifier is equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers.

CX1202V amplifier also include an HD15 Data Port connector to interface with Q-Sys and QSControl networked audio systems, for remote amplifier monitoring and control.
Features

Features

  • Exclusive PowerLight switch-mode power supply technology for high performance and compact size.
  • Custom integrated security cover for tamper proof installations.
  • Variable speed fan for low noise.
  • 1 dB detented gain controls for fast and accurate gain settings.
  • Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers.
  • XLR and detachable Euro style input connectors.
  • HD15 DataPort connector for QSControl computer control or signal processing accessories.
  • Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation.
  • Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material (33 Hz or 75 Hz on non-V models, 50 Hz or 75 Hz on V models).
  • Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs.
  • Barrier strip output connector.
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection.
  • Class H complementary bipolar output circuitry for high efficiency.
  • Optional external transformer accessory pack for isolated 70 and 100 -volt outputs (converts CX302 to 400 watts per channel isolated output).
  • Compact size - all models only 2 RU and 14" deep for reduced rack cost and floor space.
  • 3-year warranty plus optional 3-year extended service contract.
  • Light weight - all models only 21 pounds (9.5 kg) for easier racking and shipping.
Specification
STEREO MODE, Both Channels Driven
8 ohms, 20 Hz-20 kHz, 0.05% THD700 W
4 ohms, 20 Hz-20 kHz, 0.05% THD1100 W
70V, 20 Hz-20 kHz, 0.05% THD800 W
70V, 1 kHz, 0.05% THD1000 W
70V, 1 kHz, 1% THD1200 W
BRIDGED MONO MODE
16 ohms, 20 Hz-20 kHz, 0.1% THD1400 W
8 ohms, 20 Hz-20 kHz, 0.1% THD2200 W
140V, 20 Hz-20 kHz, 0.05% THD1600 W
140V, 1 kHz, 0.05% THD2000 W
140V, 1 kHz, 1% THD2400 W
Noise, 20 Hz-20 kHz>-106 dB
Input Sensitivity @ 8 ohms1.26 Vrms
Voltage Gain @ 8 ohms35 dB
Output CircuitryH, 2-tier
Distortion (SMPTE-IM)Less than 0.02%
Distortion (Typical)20 Hz-20 kHz: 10 dB below rated power1.0 kHz and below: full rated powerLess than 0.01% THDLess than 0.01% THD
Frequency Response20 Hz-20 kHz, +/- 0.2 dB
Damping FactorGreater than 500
Input Impedance6k ohms unbalanced, 12k ohms balanced
Input Clipping10 Vrms (+22 dBu)
CoolingVariable-speed fan, rear-to-front air flow
Connectors, each channelInput:3-pin XLR & 3-pin detachable terminal blocks (1 per ch)Output: Safety-shrouded barrier strip
Amplifier ProtectionFull short circuit, open circuit, thermal, ultrasonic, and RF protection.
Amplifier ProtectionStable into reactive or mismatched loads.
Load ProtectionOn/Off muting, DC-fault power supply shutdown
Dimensions3.5" H x 19" W x 14" D (89 mm x 483 mm x 356 mm)
Net Weight21 lbs (9.5 kg)
Shipping Weight27 lbs (12.3 kg)
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: QSC CX1202V Power Amplifier (Discontinued)