This CX168 Amplifier is designed for permanently installed sound systems where rackspace is at a premium. The 8-channel CX168 features Data Ports for remote amplifier management or signal processing, incorporate QSC's legendary PowerLight technology delivers unmatched reputation for quality and reliability.
| 8Ω (0.05% THD 20 Hz - 20 kHz) | 90W |
|---|---|
| 4Ω (0.1% THD 20 Hz - 20 kHz) | 130W |
| 8Ω (0.1% THD 1 kHz) | 100W |
| 4Ω (0.1% THD 1 kHz) | 140W |
| 8Ω (0.1% THD 1 kHz) | 120W |
| 4Ω (0.1% THD 1 kHz) | 180W |
| 16Ω (0.1% THD 20 Hz - 20 kHz) | 180W |
| 8Ω (0.1% THD 20 Hz - 20 kHz) | 260W |
| Noise (20 Hz - 20 kHz) | -107 dB |
| Input Sensitivity (for full-rated output power) | 1.35 Vrms @ 8 ohms |
| Voltage Gain | 20x (26 dB) |
| Input Clipping | 6 Vrms (+18 dBu) |
| Output Circuitry | Class AB+B |
| Frequency Response | 20 Hz - 20 kHz, ± 0.2 dB8 Hz - 50 kHz, +0/-3 dB |
| Input Impedance | 6 kilohms unbalanced,12 k ohm balanced |
| Distortion (SMPTE-IM) | Less than 0.02% |
| Connectors | INP: 3 position Euro-style detachable terminal block, DataPort: HD-15, OUT: Two 8-position blocks |
| Cooling | Variable speed fan, rear-to-front airflow through tunnel heat sink |
| Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection |
| Load Protection | On/off muting; Individual channel DC fault blocking |
| Power Requirements | 100, 120, 230 VAC, 50-60 Hz |
| Dimensions (H x W x D) | 3.5” (88.9 mm) x 19” (482.6 mm) x 14” (355.6 mm) |
| Net Weight | 21 lbs (9.5 kg) |
| Shipping Weight | 27 lbs (12.3 kg) |
Usually arrives in 5-9 business days.
