Rane Mongoose Remote Audio Interface (Discontinued)

The Mongoose can replace the analog mic and line level portions of an audio system with digitized audio over shielded CAT 5e cable. The Mongoose and its Tracker software work with Rane’s Remotes Audio Devices (RADs) and your CobraNet network to deliver digital audio to the “last mile” of installations – between the equipment room/rack and remote spaces.

Mongoose can be used with CobraNet as a 32 x 32 router, and without Cobranet as a 16 x 16 router. The Mongoose’s 32-by-32 digital audio matrix router receives its first 16 audio channels from up to eight RADs via the eight rear panel 8P8C (RJ-45) Remote Audio Device ports. The second 16 matrix input channels can come from two eight-channel CobraNet receive (Rx) Bundles via standard CobraNet Primary and Secondary/backup ports. The 32 matrix router outputs transmit 16 channels to eight RADs and 16 more channels to two CobraNet transmit (Tx) Bundles.

A family of RAD models connect to the Mongoose. Each converts analog audio to or from 24-bit, 48 kHz digital audio. Shielded CAT 5e cable and termination transport four digital audio channels – two channels in each direction – as well as power, ground and a communications channel via Rane’s proprietary RAD Network. Status indicators are at the RAD signal entry points, at the front and back of the Mongoose, and in Mongoose Tracker software.

• 32 by 32 digital audio matrix router
• Receive 2 and transmit 2 CobraNet Bundles
• Supports up to 32 digital audio channels from up to 8 RADs
• Ethernet port supports DHCP, Zeroconf (Link-local & mDNS) & Auto MDI/MDIX
• Mongoose Tracker setup software for PC is included
• Zeroconf-based Discovery automatically finds devices without IP setup or special IP knowledge
• Name each Mongoose, RAD and audio channel

Manual

Data Sheet