Rane MA 4 4 Channel 4 x 100W Amplifier (Discontinued)
Usually arrives in 5-9 business days.
For 25 volt audio distribution systems, the Rane TF 4 can be used by connecting the 25V loads between its 70V and 100V taps. This transformer can be used at power ratings much higher than 100 W, provided that the low-cut frequency is moved up accordingly.
For 25 volt audio distribution systems, the TF 4 can be used by connecting the 25V loads between its 70V and 100V taps (green and yellow wires). Thermal resistance of the TF 4 is only 1C/W.
Other creative combinations are possible. For example, the yellow/green pair can drive 8Ω loads near to the amplifier, with the red/yellow pair being simultaneously used for a 70 V system. Depending on loading of the 70 V system, this arrangement presents an impedance between 4 and 8Ω to the amplifier.
The TF 4 Transformers can be used at power ratings much higher than 100 W, provided that the low-cut frequency is moved up accordingly. Since voltage capability doubles with each octave, power capability quadruples each octave.
| Primary DC Resistance | Black-White < 500 mΩ |
|---|---|
| Secondary DC Resistance | Red-Yellow < 4Ω, Red-Green < 6Ω |
| Magnetizing Inductance (Primary) | > 1H (1V, 100 Hz) |
| Leakage Inductance (Primary - Secondaries Shorted) | 20 μH |
| Max Output Power | 100 Vrms @ 1 Arms |
| Average Input Power (For Thermal Dissapation) | 30 W |
| Maximum Power Loss | |
| Dimensions (Diameter) | 4.2" (106.68 mm) |
Model #:
Usually arrives in 5-9 business days.