The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.
The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.
sE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series
The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.
| Capsule | Hand-crafted 1" true condenser capsule |
|---|---|
| Polar Patterns | Cardioid |
| Frequency Range | 20 Hz - 20 kHz |
| Sensitivity | 30 mV/Pa (-30.5 dBV) |
| Max SPL | 140 / 150 / 160 dB SPL (0/10/20 dB Attenuation pad) |
| Equivalent Noise Level | 9 dB(A) |
| Dynamic Range | 131 / 141 / 151 dB (0/10/20 dB Attenuation pad) |
| Signal to Noise Ratio | 85 dB |
| Low Cut Filter | 80 / 160Hz, 6 dB/Oct, switchable |
| Attenuation Pad | 10 / 20 dB, switchable |
| Powering | 48 Volts according to IEC 61938 |
| Electrical Impedance | 125 Ohms |
| Recommended Load Impedance | >1k Ohms |
| Current Consumption | 6 mA |
| Connectivity | 3-pin male XLR connector |
| Dimensions (L x Dia) | 6.65" (169 mm) x 2.28" (58 mm) |
| Weight | 0.97 lbs (0.44 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
