The Sennheiser EW 100 ENG G3 Wireless Microphone System offers a great amount of flexibility for portable recording indoors or outdoors. Its SKP 100 G3 plug-on transmitter transforms XLR equipped devices (such as microphones and mixing consoles) into wireless devices by simply plugging the unit in. The bodypack transmitter, as well as the plug on, can by synced up to the receiver with the simple push of a button. A very small high-quality directional clip-on microphone completes this set.
This is a flexible ENG set for indoors and outdoors: EK 100 G3 adaptive diversity receiver, SK 100 G3 bodypack transmitter, ME 2 clip-on microphone, and the SKP 100 G3 plug-on transmitter that turns any XLR mic into a wireless one.
Contact the local radio frequency licensing authority in your country, who will advise you on the available frequencies and transmitter power requirements.
| Frequency response (microphone) | 80 - 18000 Hz |
|---|---|
| Compander | HDX |
| Audio-XLR connector | 3.5 mm Jack |
| Presets | 12 |
| Microphone | electret |
| Sound pressure level (SPL) | 130 dB(SPL) max. |
| THD, total harmonic distortion | < 0.9 % |
| AF sensitivity | 20 mV/Pa |
| Signal-to-noise ratio | > 110 dB(A) |
| RF output power | 30 mW |
| Transmission/receiving frequencies | 1680 |
| Switching bandwidth | 42 MHz |
| Peak deviation | +/- 48 kHz |
| In compliance with | ETS 300422, ETS 300445, CE, FCC |
| Transmitter Operating time | > 8 h |
| Input voltage range | Mic/Line: 1,8V/3,0V (SK100G2), Mic: 1,2V (SKP100G2) |
| Audio output level (unbalanced) | +10 dBu max |
| Dimensions (H x W x D) | |
| Receiver | 3.23" (82 mm) x 2.52" (64 mm) x 0.94" (24 mm) |
| SK100 G2 Transmitter | 3.23" (82 mm) x 2.52" (64 mm) x 0.94" (24 mm) |
| SKP100G2 Transmitter | 4.13" (105 mm) x 1.69" (43 mm) x 1.69" (43 mm) |
| Weight | |
| Receiver | ~ 0.35 lbs (160g) |
| SK100 G2 Transmitter | ~ 0.35 lbs (160g) |
| SKP100G2 Transmitter | 0.43lbs (195 g) |
Usually arrives in 5-9 business days.
