The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
| Connector | Clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal) |
|---|---|
| Frequency Response | 40 Hz – 20 kHz |
| Max. Sound Pressure Level | 140 dB |
| Transducer Principle | Pre-polarized condenser microphone |
| Pick-up Pattern | Cardioid |
| Nominal Impedance | 200 Ohm |
| Phantom Powering | P 24 - P 48 |
| Operating Temperature | 14° to 122° F |
| Equivalent Noise Level | 29 dB (A) |
| Equivalent Noise Level Weighted as per CCIR 468-3 | 39 dB (CCIR) |
| Current Consumption | 5.3 mA |
| Output Voltage | Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V |
| Output Voltage | Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V |
| Acoustics | Boundary layer microphone |
| Dynamic Range | 111 dB (A) |
| Sensitivity | 10 mV/Pa |
| Dimensions (H x W x D) | 0.98" (24.9 mm) x 3.34" (84.8 mm) x 3.93" (99.8 mm) |
| Weight | 0.64 lbs (0.29 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
