- Description
Details
Shure MXWAPX8 8-Channel Access Point Transceiver
The MXWAPX8 is designed for professional environments requiring reliable, high-quality wireless audio. It supports up to 8 simultaneous microphones, making it ideal for larger spaces or setups needing greater scalability. The access point provides Dante, USB-C, and analog audio outputs for versatile connectivity, while built-in IntelliMix DSP ensures automatic mixing, echo cancellation, noise reduction, and automatic gain control.
Automatic frequency management avoids interference, and Power over Ethernet (PoE) simplifies installation. Dual network ports allow flexible network configurations (Switched, Split, or Redundant), and AES 256-bit encryption secures both wired and wireless audio transmission.
Scalable to support up to 40 channels (80 in Europe in HD mode), the MXWAPX8 is equipped with diagnostic LEDs for easy monitoring of power, network, and wireless status. It can be discreetly mounted on ceilings or walls using the supplied paintable plate and is plenum-rated for safe above-ceiling installation. Remote control of microphone settings and secondary audio is available through a PC-connected interface on the same network, giving complete flexibility for conference rooms and larger AV setups.
- Features
Features
- Supports up to 8 simultaneous microphones
- Dante, USB-C, and analog audio outputs for versatile connectivity
- Automatic frequency management to avoid interference
- Built-in IntelliMix DSP for mixing, echo cancellation, noise reduction, and automatic gain control
- Power over Ethernet (PoE) for simplified installation
- Dual network ports for flexible setup (Switched, Split, or Redundant modes)
- AES 256-bit encryption for secure wired and wireless transmission
- Scalable system supports up to 40 channels (80 in Europe, double in HD mode)
- Diagnostic LEDs show power, network, and wireless status
- Mountable on ceilings or walls with an included paintable plate for discreet placement
- Plenum rated for safe above-ceiling installation
- Remote control of mic settings and secondary audio via networked interface
- Specification
Channel Capacity 8 wireless microphone channels Maximum Output Level Line Level Output +17 dBV Aux Level Output +6 dBV Mic Level Output -13 dBV Frequency Response 20 Hz ‒ 22 kHz (+0.5 dB / -3 dB) Total Harmonic Distortion + Noise 0.02%, typical
Line, Aux, Mic output level settingsDynamic Range 118 dB (A-weighted), 115 dB (unweighted), typical
Audio injected at Dante input. MXWAPX set to Direct Mode.Load Impedance >600 Ω, typical Type 3-pin Phoenix: Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio - Power Requirement 37V ‒ 57V, 12.95W PoE Class 3 Network Interface Dual ‒ RJ45: Gigabit Ethernet, Dante digital audio Antenna Type Internal Shure Custom PIFA Housing Molded Plastic Cover with Cast Zinc Metal Base Dimensions (H x W x D) 9.95" (252.7 mm) x 7.98" (202.70 mm) x 1.92" (48.8 mm) Weight 2.45 lbs (1.11 kg) - Documents
Documents
- Reviews
Write Your Own Review






