- Description
Details
The SLX2 Wireless Handheld Transmitters includes timed backlit LCD display, frequency and power lockout, and "Mute" functionality. The transmitter design allows for interchangeable microphone cartridges. Options include the BETA 87A, BETA 87C, BETA 58A, SM86, and the legendary SM58.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.For use with SLX Wireless Systems only.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
- Features
Features
SM86 Vocal Microphone Features:
- Condenser cartridge for studio quality sound
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal monitors
- Built-in three-point shock mount minimizes handling noise
- Two-stage "pop" filter reduces wind and breath noise
SLX2 Handheld Transmitter Features:
- Automatic Transmitter Setup.
- Backlit LCD with timeout feature.
- Frequency and power lockout.
- 3-segment battery fuel gauge.
- 2 AA batteries (included) provide 8 hours of continuous use.
- Interchangeable cartridges: Beta 87A, Beta87C, Beta 58A, SM86, and the legendary SM58.
- Specification
SM86 Vocal Microphone Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms Open Circuit Voltage –50 dBV/Pa (3.15 mV)(1 Pa = 94 dB SPL) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level) Connector Three-pin (XLR) professional audio Case Dark gray enamel-painted steel with matte-finished silver colored steel grille Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on diaphragm produces positive voltage onpin 2 relative to pin 3 output connector Power Phantom Supply Requirement 11 to 52 Vdc, positiveat both pins 2 and 3 Current Drain 5.2 mA Environmental Conditions Operating: –18° to 60° C (0° to 135° F) (relative humidity <90%) Storage –29° to 74° C (–20° to 165° F) (relative humidity <80%) Net Weight 0.612 lbs (278 grams) SLX2 Handheld Transmitter Audio Input Level +2 dBV maximum at -10dB position, -8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Housing Molded PC/ABS handle and battery cup Power Requirements 2 “AA” size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) Dimensions (SLX2) 10" x 2" in Diameter (254 mm x 51 mm in Diameter) Net Weight (SLX2) 0.64 lbs (290 grams) (without batteries) - Documents
Documents
- In The Box
In The Box
- (1) SM86 Vocal Microphone
- (1) SLX2 Handheld Transmitter
- Reviews
Write Your Own Review