- Description
Details
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. It is designed for use with SLX Wireless.
With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.- Features
Features
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
- Specification
Housing Galvanized steel Sensitivity –105 dBm for 12 dB SINAD, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply Configuration Impedance balanced Maximum Audio Output Level Ref. ±38 kHz deviation with 1 kHz tone XLR connector (into 600 Ω load): –13 dBV 1/4" (6.35 mm) connector (into 3 kΩ load): –2 dBV Impedance XLR connector: 200 Ω 1/4" (6.35 mm) connector: 1kΩ Pin Assignments XLR connector: 1=ground, 2=audio, 3=no audio 1/4" (6.35 mm) connector: Tip=audio, Ring=no audio, Sleeve=ground Image Rejection >70 dB, typical Volume Adjustment Range 0 dB to -25 dB Dimensions (H x W x D) 1.65" (42 mm) x 7.76" (197 mm) x 5.28" (134 mm) Weight 1.79 lbs (816 g) - Documents
Documents
- Reviews
Write Your Own Review