Shure ULXS4 Wireless Receiver (Discontinued)

Name: Shure ULXS4 Wireless Receiver (Discontinued)
Brand: Shure
SKU: SHURE-ULXS4
Price: 446 USD
Availability: OutOfStock

Write a Review

Part #:

ULXS4=-G3

Model #:

ULXS4

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The Shure ULX® Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals.

Description

The Shure ULX^® Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.

Features

Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
5-segment transmitted audio signal strength meter
RF indicator
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
XLR and 1/4-inch output
Rugged metal chassis
1/2 rack design

Specifications

RF Carrier Frequency Range	554.000 to 865.000 MHz
Effective Range	100 m (300 ft.) under optimal conditions
Connector	Antenna
Connector Type	BNC
Actual Impedance	50 Ω
Nominal Input Level	–95 to –30 dBm
Maximum Input Level	+6 dBm (–20 dBm recommended)
Pin Assignments	Shell = Ground Center = Signal
Voltage for Remote Power	12 Vdc, 150 mA maximum
Connector	Power Input
Connector Type	IEC 320
Nominal Input Level	15 Vdc
Maximum Input Level	18 Vdc
Pin Assignments	IEC Standard
Connector	High Z Audio
Output Configuration	Unbalanced (1/4 in.)
Actual Impedance	3 kΩ
Pin Assignments	Tip = Hot Ring/ Sleeve = Gnd
Connector	Low Z Audio
Output Configuration	Balanced (XLR)
Actual Impedance	22 Ω
Pin Assignments	1 = Ground,2 = Hot,3 = Cold
XLR Connector (into 600 ohm load)	+3.9 dBV (line), –17 dBV (mic)
1/4	–2 dBV
Impedance (output)	50 ohms at line level; 2000 ohms at mic level
Modulation	±38 kHz deviation compressor-expander system with pre- and de-emphasis
Dynamic Range	>100 dB, A-weighted
RF Sensitivity	1.26 μV for 12 dB SINAD (typical)
Image Rejection	80 dB typical
Spurious Rejection	75 dB typical
Ultimate Quieting	>105 dB, A-weighted
System Distortion	0.3% total harmonic distortion, typical
Power Requirements	14 - 18 Vdc (negative ground), 550 mA
Battery Life	8 to 9 hours (with 9V alkaline battery)
Operating Temperature Range	- 20° to 49° C (- 4° to 120° F)
Overall Dimensions	43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.)
Net Weight	1049 g (2 lbs 5 oz)