SoundTube CM800d 8 inch In-Ceiling Deep Can Speaker

Home /
SoundTube CM800d 8" In-Ceiling Deep Can Speaker - Black (Discontinued)

Description

Details

SoundTube CM800d 8" In-Ceiling Deep Can Speaker

The CM800d is an 8-inch, two-way, blindmount, in-ceiling speaker that delivers extended low-end response (56 Hz) and optimal off-axis performance (up to 10 kHz, EASE™ documented). SoundTube's proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The CM800d speaker design incorporates an extra deep steel backcan (12.46 in.), a low-profile grille, a proprietary M8™ motorboard and a five-position tap switch with voice-coil-direct position. Mounting hardware is included and features a fast and secure constant-tension fixed-wing mounting system.

Features

Features

Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage (up to 10 kHz, independently verified)
One 8" (203 mm) polypropylene woofer and one 1" (25 mm) convex aluminum tweeter with FerroFluid™ cooling mounted to a proprietary cast-aluminum M8™ baffle and heat sink
A 12.46" steel DeepCan™ provides additional bass response
Rapid-installation, blind-mount, fixed wing mounting mechanism with constant- tension design affixing to ceiling thicknesses ranging from .25" (6.4 mm) to 1.91" (48.5 mm)
Separate tool-free magnetic grille and bezel assembly for ease of install and infield painting
Steel grille with protective powder-coated finish for lasting durability
Easy access five-position selectable tap switch for 25-, 70.7-, 100-volt and low impedance applications simplifies ordering and inventory tracking
Sensitivity of 90.5 dB (1 W/1 m) offers high-output capabilities and reduced amplification costs
UL 1480 and 2043 approved
Included accessories: tile bridge, Euroblock connector, conduit plate, support cable, paint mask/installation aid
Optional accessories: color-coded (purple) pre-construction bracket, junction box, safety restraint strap

Specification

System Type	8" coax, in-ceiling, ported (120-watt transformer for25/70.7/100-volt)
Impedance (nominal) 1	8 ohm
Sensitivity dB @ 2.83 V / 1 m	90.5 dB
Sensitivity dB @ 1 W / 1 m2	90.5 dB
Frequency Response (- 3 dB)3	73 Hz - 22 kHz
Frequency Response (-10 dB)3	56 Hz - 22 kHz
Max. Program Power4	250 W
Max. Continuous Power RMS5	125 W
Max. Power SPL @ 1 M6	111.5 dB
Coverage Angle (-6 dB @ 2 kHz)	125°
Coverage Angle (-6 dB @ 10 kHz)	95°
Coverage Angle (averaged from 2to 10 kHz)	125°
Directivity Factor (Q)	3.8 (averaged 100 Hz - 10 kHz); 4.9 (2kHz)
Directivity Index (DI)	5.3 dB (averaged 100 Hz - 10 kHz); 6.9 dB (2kHz)
Tap Selector	Five-position rotary switch with 8-ohm-direct position
Transducer - Low-Frequency Driver	8" (203 mm) Polypropylene cone, butyl rubber surround
Transducer - High-Frequency Driver	1" (25 mm) Convex aluminum tweeter with waveguide
Low-Frequency Voice Coil	30.4 mm (1.20 in.)
Crossover Frequency	3.0 kHz
Network Type: Low Pass	12 dB per octave, 2nd order
Network Type: High Pass	12 dB per octave, 2nd order
Enclosure Material	Drawn steel backcan with ABS baffle
Motor-board	Cast aluminum
Grille	Steel with powder-coat finish with ABS bezel
Inputs	Four-pin, 5 mm Euroblock for individual or daisy chainconnection
Backcan Diameter	11.68" (296.7 mm)
Backcan Height	12.46" (316.5 mm)
Visible Diameter	14.76" (374.9 mm)
Visible Height	1.08" (27.4 mm)
Mounting Hole Diameter	12.75" (323.9 mm)
Min / Max Ceiling Thickness	0.25" (6.4 mm) – 1.91" (48.5 mm)
Weight	18.8 lbs (8.5 kg)
Shipping Weight	23.8 lbs (10.8 kg)

Documents