SoundTube IPD-SM52-EZ-WX 5.25" IP-Addressable Weather-Resistant Dante-Enabled Speaker - White

SoundTube IPD-SM52-EZ-WX 5.25" IP-Addressable Dante-Enabled Speaker - White

The IPD-SM52-EZ-WX is a Dante-enabled, weather resistant, digital end-point solution in a surface-mount loud speaker. This speaker includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 5.25 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. IP-Rating: IP65. Included accessories: Safety cable, wall mount bracket, conduit connector and port plug. If used outdoors, port plugs must be installed to ensure protection from moisture.

*Note: If used indoors, remove the grille and take the plug out of the port for greater bass output. Port must remain plugged to maintain IP65 rating in outdoor use. Also: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II)

• STNet IP-addressable, self-powered (PoE) speaker
• Dante™ and AES67 I/O for interconnectivity with Dante and AES67-enabled audio systems
• BroadBeam Ring™ delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker
• One 5.25” (133 mm) polypropylene woofer and one 1” (25.4 mm) soft dome tweeter
• Fast connection of power, audio, and control functions via one CAT5 or CAT6 cable
• 40 W PoE provided by SoundTube STNet Switch; also works with standard PoE+ and PoE switches
• Provides report-back on any problems via SoundTube software
• Aluminum grille with powder-coat finish
• Vertical and horizontal mounting offer precision aiming for indoor and outdoor applications
• Included accessories: safety cable, wall-mount bracket, port plug, Allen wrench, and watertight strain-relief bushing

Data Sheet