SoundTube MCA10004t Dante-Enabled Multichannel Networking Amplifier

SoundTube MCA10004t Dante-Enabled 4-Channel (4 x 1000W) Networking Amplifier

The MCA10004t multichannel amplifier is Dante enabled, and allows for fixed resistance and fixed voltage output modes. At 4 ohms, this amplifier offers 1000W respectively per channel. The 4.3" LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, as well as output mode selection. The included software, STNet MCA Control, provides the user with complete control over the amplifier. This software enables the user to monitor the real-time status of the amplifier, and set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate, parametric equalization, matrix router, delay, and more!

• Standard 19-inch chassis design with a height of 2U
• High-efficiency switching power supply with PFC and class D digital amplifier technology delivers extremely low output distortion and high efficiency
• High-end DSP provides built-in functions such as compressor, limiter, FIR processor, noise gate, parametric equalizer, matrix router, delay, high and low pass filtering, and other DSP functions
• Amplifier supports matrixed and bridged output modes
• Matrix mode allows for four independent output channels
• Bridged mode combines two of the four channels for 100V fixed voltage output, high wattage 8 ohm, and 16 ohm outputs
• Fixed voltage and fixed resistance modes include 4Ω, 8Ω, 16Ω, 70V, 100V
• Front panel includes a 4.3-inch IPS display with capacitive touch control
• Display allows monitoring of mains voltage and current, amplifier status, temperature, output mode, real-time voltage, current and power, channel volume, and speaker impedance
• Amplifier supports TCP/IP for remote connection using STNet MCA Control software
• Adjustable input sensitivity options of 2dBu, 6dBu, or 12dBu set through PC software or LCD screen
• Supported input sources include Analog, AES3 digital audio, and Dante network
• AES3 and Dante inputs ducked for analog input on the same channel
• Only channels A and C support AES3 digital audio input
• Amplifier automatically calculates and displays speaker impedance on front panel and STNet MCA Control
• Amplifier enters standby after 30 minutes of no input and exits standby with input, power button press, or MCA STNet Control command
• Supports remote standby control with approximately 5-second wake time
• TCP/IP network function manages multiple devices and supports network interface cascading
• RS485 port supports external control
• Wide voltage operation from 110-240VAC

Spec Sheet

Manual