Tascam DR-100mkIII Portable Linear PCM Recorder (Discontinued)
Usually arrives in 5-9 business days.
The DR-70D from TASCAM is the ultimate audio recording solution for filmmakers. Four balanced XLR mic inputs meet the requirements of production sound, from professional users to indie DSLR shooters. The compact format can be mounted either above or below a camera, and a pair of built-in microphones can capture sound on-set. The interface is designed for quick adjustment, with additional features to keep recording levels under control.
Four XLR mic inputs with phantom power are included on the DR-70D, enough to cover busy scenes. The High-Quality HDDA (High Definition Discrete Architecture) Mic Preamps include 64dB of gain for quiet performances, and all four inputs have individual gain controls. Each input has a limiter and low cut filter available for controlling volume. Also included is Dual Recording mode, which records a safety copy of your audio at a lower level to prevent distorted takes. Quality components like 5532 op amps are used throughout for the clearest audio possible.
Tracks on the DR-70D are captured to SD card, SDHC or SDXC media – up to 128GB cards are supported. The recorder has tripod mounts on the top and bottom of the unit, allowing it to be mounted on a camera, a follow-focus cage, or used standalone. Other production friendly features include a slate tone, low-noise buttons, a powerful headphone output, and standard AA battery power.
Uniquely designed for the needs of filmmakers, television producers, advertisers, and documentarians, the DR-70D packs multitrack recording into a package compact enough to use with any camera.
| Recording Media | SDHC card (4GB to 32GB), SDXC card (48GB to 128GB) High speed cards |
|---|---|
| Recording Format | WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit |
| Number of Channels | 4-channel (stereo × 2, mono × 4) |
| Analog Audio Input | |
| 1/L, 2/R, 3/L, 4/R Connectors | XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3 mm (1/4") TRS standard jack |
| Set to MIC / MIC + PHANTOM | Input Impedance: 2k ohms Phantom Power: 48V +/-4V (10mA/CH), 24V +/-4V (10mA/CH) Maximum Input Level: 0dBu Minimum Input Level: -72dBu MIC Input Gain: TRIM MAX LOW: +21dB MID: +36dB HIGH: +51dB HI + PLUS: +63dB |
| Set to LINE | Input Impedance: 10k ohms or more Standard Input Level: +4dBu Maximum Input Level: +20dBu |
| 1/2 Connector | Connector: 3.5 mm (1/8") stereo mini jack (this connector can be supplied plug-in power) Input Impedance: 10k ohms Maximum Input Level: +10dBV Minimum Input Level: -50dBV MIC Input Gain: TRIM MAX LOW: +3dB MID: +11dB HIGH: +26dB HI + PLUS: +38dB |
| CAMERA IN Connector | Connector: 3.5 mm (1/8") stereo mini jack Input Impedance: 10k ohms Standard Input Level: -10dBV Maximum Input Level: +6dBV |
| Analog Audio Output | |
| LINE OUT Connector | Connector: 3.5 mm (1/8") stereo mini jack Output Impedance: 200 ohms Standard Output Level: -10dBV Maximum Output Level: +6dBV |
| CAMERA OUT Connector | Connector: 3.5 mm (1/8") stereo mini jack Output Impedance: 200 ohms Standard Output Level: -40dBV Maximum Output Level: -24dBV |
| PHONES Connector | Connector: 3.5 mm (1/8") stereo mini jack Maximum Output Level: 20mW + 20mW |
| USB | Connector: Micro-B type Format: USB 2.0 HIGH SPEED mass storage class |
| Remote Connector | 2.5 mm TRS jack |
| General | |
| Power | 4 AA batteries (Alkaline or NI-MH) USB bus power Dedicated AC adapter (TASCAM PS-P515U, sold separately) Dedicated external battery pack (TASCAM BP-6AA, sold separately) |
| Power Consumption | 5.0 W |
| Continuous Operation Time | 2ch WAV, 44.1kHz, 16bit rec Phantom power not used |
| Operating Temperature | 0 to 40˚C |
| Standard Accessories | USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty) |
| Dimensions (H x W x D) | 2.2" (55.2 mm) x 6.65" (169 mm) x 4.2" (106.5 mm) |
| Weight | 1.16 lbs (530 g) |