The BG-2035 is a BG-2000 Series mixer amplifier that is a total redesign of the highly successful BG-1000 Series and not just for design's sake. After speaking with customers, who told exactly what they wanted in a commercial background music and paging amplifier. TOA responded with a newly-engineered chassis, designed to not only look better, but perform better and most of all-install easier. Starting with removable euro-block connectors to make wiring a snap, TOA added assignable MOH/Second Zone source assignment and provided access to mute priority and other settings via rear panel DIP switches-no more "popping the top". Lastly, they have upped the power-to 35W on the lower end model. Of course, they kept all the good stuff-solid, reliable performance for which TOA has been renowned. TOA's new performance-oriented, cost-effective amplifiers.
The new BG-2000 Series of mixer/amplifiers have been designed to meet the requirements that users most request. Utilizing TOA's technological expertise and total reliability in cost-effective amplifier designs with the most useful features and functions has created a new amplifier series ideal for paging, music distribution and music-on-hold applications. These advantages along with quick setup and easy installation capability make the new BG Series ideal for use in a wide range of environments from meeting rooms to restaurants and retail stores. Incorporating TOA's no-compromise technology.
The BG-2000 Series incorporates all the performance and audio quality that TOA amplifiers are known for, such as an extended frequency response, high S/N ratios and minimal distortion. Output regulation is also ultra-stable. In addition, the BG-2000 Series are equipped with removable terminal blocks making them easy to install and configure in a system. The BG-2000 Series consists of three models: BG-2035 (35W), BG-2060 (60W), and the BG-2120 (120W).
| Power Source | 120V AC, 60 Hz |
|---|---|
| Rated Output | 35W |
| Power Consumption Rated Output | 94W |
| Frequency Response | 50 Hz – 20 kHz |
| Total Harmonic Distortion | 0.5% or less, at 1 kHz, rated output |
| Input | Microphone, Line 1/TEL (Selectable), Line 2, Line 3, Module |
| Input Sensitivity | |
| Microphone | 60 dB, 600Ω, electronically balanced, removable Impedance terminal block |
| Line 1/TEL | 10 dB/–20 dB, 10 kΩ, electronically balanced, removable terminal block |
| Line 2 | 10 dB, 10 kΩ, unbalanced, removable terminal block and RCA jacks |
| Line 3 | 10 dB, 10 kΩ, unbalanced, removable terminal block and RCA jacks |
| Output | |
| Speaker Output | 4Ω, 25V (18Ω), 70V (140Ω) Balanced, removable terminal block |
| MOH Output | 0 dB, 600Ω, balanced, removable terminal block |
| Line Output | 0 dB, 600Ω, unbalanced, removable terminal block |
| Output Regulation (1 kHz) | Under 2 dB, no load to full load |
| S/N Ratio | |
| Microphone | Over 60 dB |
| Line 1/TEL | Over 75 dB |
| Line 2 | Over 75 dB |
| Line 3 | Over 75 dB |
| Module | Over 75 dB |
| Band Pass | 20 Hz – 20 kHz |
| Tone Controls | Centered |
| Tone Control | Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz |
| Control | Microphone gain control, Line 1/TEL gain control, Line 2 gain control, Line 3 gain control |
| Indicator | Power LED, Signal level LED, Peak LED |
| Other Feature | Automatic electronic drive limiter |
| Operating Temperature | 0 to 40° C (32 to 104º F) |
| Operating Humidity | 35% – 80% RH (no condensation) |
| Finish | Panel: ABS resin, black Case: Steel plate, black, paint |
| Dimensions (H x W x D) | 3.71" (94.3 mm) x 10.39" (264 mm) x 10.52" (267.3 mm) |
| Weight | 11.68 lbs (5.3 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
