- Description
Details
Williams Sound DL210 SYS 2 2.0 Large-Area Induction Loop System with Network Control
Large-area system offers flexible, powerful software control of mixing, equalization, compression and phase shift. Potent, class D, pulse-width amplifiers maximize efficiency and reduce size and weight. Dual-amplifier design offers the option of a single 12A output for large perimeter loops or dual 10A outputs for phase loop arrays.
- Features
Features
- Network control - allows control and calibration of unit remotely with application software
- High continuous current 12 Arms (17 Apk) per output continuous
- LCD Screen with VU metering, easy one-button menu control
- DSP Audio Processing
- Dante™ Input
- USB for firmware updates
- Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay
- Power-save mode
- Adjustable output delay for multiple amps in large venues
- Fault warning and active protection against shorted or open circuits and overheating
- Loop fault relay output (via RS-232 DB-9 connector)
- Two 3-position terminal block inputs configurable as microphone input or line-input, balanced or unbalanced
- Standard 2 RU, 19" rackmount
- Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers.
- Suitable for phased-array or dual-loop systems.
- Phased-array mode automatically produces 90° phase shift in slave loop output
- Speaker mode - switches one loop output to drive a passive speaker
- Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system
- Test specification provided to IEC 62489-1 standard
- Meets ADA / ADAAG guidelines
- Specification
DL210 Net 2.0 Power Supply Internal, Universal 100-240 VAC, 50/60 Hz, 250WFuse: 5 x 20 mm, 5 A, 250VAC power plug is IEC 320-C14 Ethernet (1x) RJ-45; 10-100 MBps USB (1x) standard-B. USB 1.1, 2.0 or 3.0 supported RS-232/Loop Fault Relay (1x) DB-9 jackRS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gndLoop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NORelay contact rating: 2.0 A @ 30 VDC Environment 0-35° C ( 32-95° F), 0-90% relative humidity Mic/Line Inputs (2x) 3-position terminal block, input impedance=1.5 kΩ Mic, 10 kΩ LineConfigurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalancedPhantom supply (48V) 70-100V Input (1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems Line Outputs (1x) 3-position terminal block; loop-through of Mic/Line Input 1 & Line Input 2, +4 dBu, Balanced or UnbalancedThe line outputs mirror the audio of the loop output Loop Output(s) (1x) 2-position terminal block per output Audio Output Delay Adjustable from 0 to 165 msec Headphone Output (1x) 1/4" stereo headphone jack, on front of unitMonitored input or output selectable in menu Loop Fault Relay Integrated into RS-232 DB-9 jackPin 1=NC, Pin 4=Common and Pin 6=NOContact rating: 2.0 A @ 30 VDC Loop Output Drive Voltage 33.3 Vrms (47.1 Vpk) continuous Rated Loop Output Current 12 Arms (17 Apk) per output Loop Resistance Range 0.5 Ω to 3.0 Ω (DC) Speaker Output Integrated into Loop Output A terminal block (switchable in menu)225W x 1 channel @ 4Ω, 125W x 1 channel @ 8Ω, (Class D)Frequency response = 20 Hz-20 kHz, THD=0.07% Loop Frequency Response 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.) Dimensions (H x W x D) 3.5" (88.9 mm) x 19" (482.6 mm) x 12" (304.8 mm) Weight 14.3 lbs (6.5 kg) Ear 022 Style Around-ear speaker Plug 3.5 mm mono Sensitivity 118 dB @ 1kHz Driver Size 23 mm Nominal Impedance 32Ω Frequency Response 20 - 20kHz Max Power Input 30 mW Cord 39" (990.6 mm Weight 0.033 lbs (0.015 kg) IDP 009 Dimensions (H x W x D) 0.125" (3.175 mm) x 6.25" (158.75 mm) x 10.38" (263.5 mm) IDP 013 Dimensions (H x W x D) 7" (177.8 mm) x 6" (152.4 mm) x 1.75" (44.45 mm) Weight 0.794 lbs (0.36 kg) PLR BP1 Color/Material Black ABS/polycarbonate molded plastic case Battery Type (2) AA (1.5VDC) Alkaline or NiMH (rechargeable) Battery Life Up to 200 hours with Alkaline batteries LED Indicator Green LED indicates power on, flashes when batteries are low Headphone Jack 3.5 mm stereo TRS jack works with mono or stereo headphones Volume Control External switched thumb wheel controls power on/off and volume level Tone Control Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position) Induction Coil Maximum reception: receiver oriented vertically Power Output 35 mW (max) into 33 ohms mono impedance THD <2% Frequency Response 300Hz to 10KHz, -6dB Dimensions (H x W x D) 4.1" (104 mm) x 2.85" (72 mm) x 1.38" (35 mm) Weight 0.29 lbs (0.13 kg) with batteries, 0.163 lbs (0.074 kg) without batteries Description Cloth-based warning tape, 165ft Color White clothBlue Williams Sound logo, T-Coil Logo, and Warning Text Warning Text Warning: Do not cut or disturb - Hearing assistance induction loopwire Used With PLW F300, PLW F500 Dimensions (Dia x W) 6" (152.4 mm) x 2" (50.8 mm) Weight 1.28 lbs (0.581 kg) - Documents
Documents
- In The Box
In The Box
- (1) DL210 NET 2.0 Induction Loop Amplifier
- (2) EAR 022 Surround Earphones
- (2) PLR BP1 Body-Pack Receivers with Batteries
- (1) IDP 013 Induction Loop Status Sign
- (1) BAT KT6 Dual Drop-In Charger Kit (Includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH Batteries)
- (2) PLW F500 500 ft. Rolls of Flat Power Loop Wire
- (6) FWT 001 Rolls of Flat Wire Warning Tape
- (1) IDP 009 ADA Wall Plaque (T-Coil)
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $49.99 and Up - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
