- Description
Details
Bose ControlSpace EP40-D Dante Endpoint
The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.
- Features
Features
- Integrated discovery, routing, configuration and control using
- ControlSpace Designer™ software
- Four balanced mic/line inputs using 3-pin Euroblock connectors
- Eight mic/line gain settings to accommodate any analog input level – gain is individually adjustable per channel via ControlSpace Designer software
- 802.3af compliant PoE powered to work with any compliant PoE network switch, or an external +24VDC supply
- +48VDC Phantom power – software switchable per channel
- ID indicator allows easy identification of which EP40-D is communicating with ControlSpace Designer software
- Dante daisy-chaining allows multiple EP40-Ds to be connected over a single home-run to the Ethernet switch
- Specification
Audio Inputs Input Channels Four (4) analog, balanced microphone/line level Connectors Four (4) 3.81 mm Euroblock connector, 3-pin Phantom Power +48VDC, software selectable per input Gain Settings -12 / 0 / +3 / +15 / +18 / +30 / +33 / +45 dB, software selectable Input Impedance > 1.8 kΩ at any gain setting Equivalent Input Noise –115 dBu (+45 dB gain) Maximum Input Level +20 dBu (using -12 dB gain setting) General Digital Conversion 48 kHz / 24-bit System THD < 0.01 % (at any gain, input signal 3 dB below maximum) PoE Class Class 0 802.3af PoE PD compliant Certifications FCC Part 15 Class B, CE (EN 55022 Class A), IEC 60950 Operating Temperature 32 °F – 104 °F (0 °C – 40 °C) Dimensions (H x W x D) 1.5" (38 mm) x 8.32" (211 mm) x 4.74" (120 mm) - Documents
Documents
- Reviews
Write Your Own Review