Bose Professional ControlSpace EP22-D Dante Endpoint (Discontinued)

By Bose Professional

Bose Professional ControlSpace EP22-D Dante Endpoint (Discontinued)

Write a Review

Part #:

738675-0010

Model #:

ControlSpace EP22-D

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The Bose ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system.

Description

The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it's needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.

Features

Small form factor, can be unobtrusively located near analog devices
Integrated discovery, routing, configuration and control using ControlSpace Designer™ software
Dual power options (DC or PoE) means the EP22-D will work with either standard or PoE Ethernet switches
Three input gain settings for common line and microphone sources. Channel gain is individually adjustable via ControlSpace Designer software
+24VDC Phantom power
Separate analog output gains to accommodate both consumer and professional line-level requirements

Specifications

Audio Inputs
Input Channels	Two (2) analog, balanced microphone/line level
Connectors	Two (2) 3.81 mm Euroblock, 3-pin
Phantom Power	+24VDC, software selectable per input
Gain Settings	0 / +25 / +40 dB, software selectable
Input Impedance	> 1.8 kΩ at any gain setting
Equivalent Input Noise	-115 dBu (at +40 dB gain)
Maximum Input Level	+12 dBu (at 0 dB gain)
Audio Outputs
Output Channels	Two (2) analog, balanced line-level, with automatic muting on loss of Dante signal
Connectors	Two (2) 3.81 mm Euroblock, 3-pin
Output Gain	0 / +10 dB, software selectable
Output Noise	< –90 dBu @ 0 dB gain
Maximum Output Level	+12 dBu
Output Impedance	200 ohms (100 ohms unbalanced)
General
Digital Conversion	48 kHz / 24-bit
System THD	< 0.01 % (at any gain, input signal 3 dB below maximum)
PoE Class	Class 0 802.3af PoE PD compliant
Certifications	FCC Part 15 Class A, CE (EN 55022 Class A)
Operating Temperature	32 °F – 104 °F (0 °C – 40 °C)
Dimensions (H x W x D)	1.06" (27 mm) x 6.45" (164 mm) x 3.45" (88 mm)