Large Office Sound Masking System

This large office sound masking system with 20 Quam MA/E9/S2/T8 sound masking speakers, an Atlas Sound PA601 power amplifier, GPN1200K sound masking generator kit and 500' speaker wire is designed for offices approximately 4500 sq ft, and other commercial environments with drop-tile ceilings. 

Quam MA/E9/S2/T8 Sound Masking Loudspeakers

The MA/E9/S2/T8 is a 617 CID, ceiling grid mount, sound masking loudspeaker assembly consisting of an 8C10PAX - 8" O.D. dual cone loudspeaker with a 10 oz. magnet and a TBL70 - 4W-70V rotary select transformer. Support chain is supplied.

Atlas Sound PA601 Single Channel Power Amplifier

The PA601 is the perfect choice for distributed background music (BGM) systems when the requirement is simple amplification without MOH or advanced mix functionality. The PA601 features 60 Watts of pure power in a compact package with simple, rear mounted RCA I/O. A unique loudness contour control provides just the right amount of low-frequency enhancement for low-level listening environments.

Atlas Sound GPN1200K TSD Sound Masking Generator Kit

The Atlas Sound GPN1200K is a sound masking kit solution that includes the TSD-GPN1200 sound masking generator, TSD-PS24V250MA power supply, and TSD-RMK 1RU rack mount kit. The Atlas Sound TSD-GPN1200 sound masking generator is perfectly suited for basic sound masking systems. The analog topology design eliminates repeating cycles commonly found in other manufactures low-cost digital designs. The TSD-GPN1200 allows selection between pink or white noise sources and incorporates a variable balanced output to match input requirements of Atlas Sound equalizers and amplifiers. In addition to the line level output, a 4W, 70V output is provided to power up to six masking loudspeakers tapped at .5W each. A variable hi-cut filter with operating range between 1 kHz and 8 kHz at a slope of 6 dB per octave supports equalization requirements for most basic Sound Masking systems. Both outputs may be used simultaneously allowing large zones to be addressed with external equalization and amplification while a smaller zone is powered by the internal 70.7V amplifier with spectrum control provided by the on board hi-cut filter.

Quam MA/E9/S2/T8 Sound Masking Loudspeakers:

• 70.7V transformer
• Dust-proof perforated steel baffle and 890 CID
• (14.3L) composite back box
• Rust-resistant CRS finish
• Support chain is supplied
  
  

Atlas Sound PA601 Single Channel Power Amplifier:

• 1 Balanced or Unbalanced Input
• 1 Unbalanced Line Output
• 60 Watt Single Input Power Amp
• Dual Voltage Operation 110 - 220 VAC
• Loudness Contour Switch (+4dBu @ 100Hz and 10kHz)
• Simple Clean Power
  
  

Atlas Sound GPN1200K TSD Sound Masking Generator Kit:

• Balanced Line Output Plus 4W, 70.7V Output
• Adjustable Gain and Hi-Cut Filter
• EQ & Gain Bypass for Line Output
• Selectable Pink or White Noise Source
• Security Covers Included for All Rear Panel Controls
• Stand Alone or Rack Mountable
• Meets Energy Star Standards
• Compact Chassis Design

• (20) Quam MA/E9/S2/T8 Sound Masking Loudspeakers
• (1) Atlas Sound PA601 Single Channel Power Amplifier
• (1) Atlas Sound GPN1200K TSD Sound Masking Generator Kit:
• (1) TSD-GPN1200 Sound Masking Generator
• (1) TSD-PS24V250MA 24VDC Power Supply
• (1) TSD-RMK Rackmount
• (500') West Penn 224 18/2 AWG Speaker Wire